Creating Blend Curves Between Points

You can create a blend curve between points.

Before you begin: Open a 3DShape containing curves.
See Also
Creating Blend Curves on a Projection Surface
Creating Blend Curves Between Surfaces
  1. Select the positions, for example the endpoints of two curves.
  2. From the Surfacing section of the action bar, click OmniCurveBlend .
  3. Change the Relative Parameter value in the panel or use the handles to move the blend curve's endpoints along the support curves.


  4. Change the G1/G2/G3 Shape factors to modify the blend shape.

    Influence of the G1 Shape factor Influence of the G2 Shape factor Influence of the G3 Shape factor
    G1-G1 = 0.5 G2-G2 = 1.0 G3-G3 = 0.5






    G1-G1 = 1.0 G2-G2 = 1.0 G3-G3 = 1.0






  5. Optional: Select Reverse or use the handles to reverse the tangent direction.