About Chamfer Dimensions

You can create chamfer dimensions. However, you should be familiar with some concepts that are described in this section before you begin creating chamfer dimensions.

See Also
Creating Chamfer Dimensions
  • In a context, you can create chamfer dimensions for the following types of cylindrical shapes: cylinder/cone/cylinder, plane/cone/cone, plane/cone/cylinder, plane/plane/plane.

  • When creating chamfer dimension on cylindrical shapes in a context, remember that:
    • in the case of projection views, the projection plane needs to be parallel to the cylinder axis.
    • in the case of section views or section cuts, the section plane needs to be parallel to, and to go through, the cylinder axis.
    • the sketched profile on which the cylinder (or the cone) is based must be a circle.
  • All options defined in Me > Preferences > App Preferences > 3D Modeling > Mechanical Systems > Drafting (Dimensions and Handles tabs) are taken into account when creating chamfer dimensions.
  • When editing chamfer dimension text properties (right-click and selectProperties >Dimension Texts tab), any information (for example associated text, fake dimension, tolerance, text before/after, etc.) added to the main value, will actually be positioned according to the first value (excluding the "x" symbol, for example "19,1").

    This information will be positioned in the following order: Text Before/Prefix/first value/Tolerance/Suffix/Text After/second value (including the "x" symbol, for example "x 20,37"). An example is provided below, with a Text After.

  • When re-routing chamfer dimensions which have only two reference elements (the element to be dimensioned and a single reference line or surface), you will need to select three reference elements.