Calculated Material Classifications List

Ypu can use the Calculated Material Classifications list to view the rolled-up calculated material classifications of the part.

These are the classifications of the materials rolled-up from the selected equivalents of the part and its BOM components. In other words, if a part in the BOM has an MEP that is marked as the selected equivalent, then the classifications of the materials of this MEP are rolled-up and stored with the part and any parts that reference it. If the part in the BOM has no selected equivalent MEP defined, then the classifications of the materials directly associated with the part or calculated material classifications in component parts of the BOM are rolled-up.

Required access roles:

  • Baseline: Reader, Author
  • App-specific: Compliance Engineer

To access this page:

  1. Open the required part. For more information, see Opening a Part.
  2. In the navigation pane, click Compliance PowerView.
  3. Click the Material Classifications (Calculated) tab.

This topic describes:

This page discusses:

See Also
In Other Guides
Page Toolbar Icons

Columns

Column NameDescription
NameThe name of the material classification.
Compliance Type The compliance type of the material classification.
% in PartThe percentage of the material classification in the part.

Actions/Toolbar Commands

ActionDescriptionFor More Information
Roll Up Compliance Data Rolls up compliance data.About Rollups