DELMachiningResourceModel Types

NCMachiningTemplate

General Information


Property	Comments
`NLS name`	Machining Process
`Extensible`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       NCMachiningTemplate

Methods

The following methods are associated with this type:

Example

PLMDELResNCAPTTool

General Information


Property	Comments
`NLS name`	APT Tool
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCAPTTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Height`	Height	LENGTH	-
`V_Horizontal_Distance`	Horizontal distance	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tip_Angle`	Tip angle	ANGLE	-
`V_Tool_Angle`	Tool angle	ANGLE	-
`V_Vertical_Distance`	Vertical distance	LENGTH	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCAccessory

General Information


Property	Comments
`NLS name`	NC Accessory
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCAccessory

Example

PLMDELResNCBallStylusTool

General Information


Property	Comments
`NLS name`	Ball Stylus Tool
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCBallStylusTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Length_Down`	Ball down length	LENGTH	-
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Stylus_Material`	Stylus material	String	-
`V_Stylus_Type`	Stylus type	String	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCBarrelMillTool

General Information


Property	Comments
`NLS name`	Barrel Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCBarrelMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Barrel_Radius`	Barrel radius	LENGTH	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Distance`	Radial distance	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Vertical_Distance`	Vertical distance	LENGTH	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCBoringAndChamferingTool

General Information


Property	Comments
`NLS name`	Boring and Chamfering Tool
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCBoringAndChamferingTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Chamfer_Diameter_1`	Chamfer diameter 1	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCBoringBar

General Information


Property	Comments
`NLS name`	Boring Bar
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCBoringBar

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Bore_Ability`	Boring ability	V_Bore_Ability_Enum	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Diameter`	Maximum diameter	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Min_Diameter`	Minimum diameter	LENGTH	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cut_Diameter`	Non cut diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tip_Angle`	Tip angle	ANGLE	-
`V_Tip_Length`	Tip length	LENGTH	-
`V_Tip_Radius`	Tip radius	LENGTH	-
`V_Tool_Angle`	Tool angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCCenterDrillTool

General Information


Property	Comments
`NLS name`	Center Drill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCCenterDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Size_Designation`	Size designation	String	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCConicalMillTool

General Information


Property	Comments
`NLS name`	Conical Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCConicalMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCCounterboreMillTool

General Information


Property	Comments
`NLS name`	Counterbore Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCCounterboreMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCCountersinkTool

General Information


Property	Comments
`NLS name`	Countersink
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCCountersinkTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCCylinderStylusTool

General Information


Property	Comments
`NLS name`	Cylinder Stylus Tool
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCCylinderStylusTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cylinder_Length`	Cylinder length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Stylus_Material`	Stylus material	String	-
`V_Stylus_Type`	Stylus type	String	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCDiamondInsert

General Information


Property	Comments
`NLS name`	Diamond Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCDiamondInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

PLMDELResNCDrillTool

General Information


Property	Comments
`NLS name`	Drill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCEndMillTool

General Information


Property	Comments
`NLS name`	End Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCEndMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cutting_Diameter`	Non cutting diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCExternalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	External Groove Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCExternalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Hand_Angle`	Hand Angle	ANGLE	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCExternalInsertHolder

General Information


Property	Comments
`NLS name`	External Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCExternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle_From_Insert`	Gauge Angle	ANGLE	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Holder_Capability`	Holder Capability	V_Holder_Capability_Enum	-
`V_ISO_Approach_Angle`	ISO Approach Angle	V_ISO_Approach_Angle_Enum	-
`V_ISO_Clamp_System`	ISO Clamp System	V_ISO_Clamp_System_Enum	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Height`	ISO Height	String	-
`V_ISO_Length`	ISO Length	V_ISO_Length_Enum	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Width`	ISO Width	String	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Kappa_R`	Kappa R	ANGLE	-
`V_Leading_Angle`	Leading Angle	ANGLE	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Max_Rec_Depth`	Max Rec. Depth	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-
`V_Trailing_Angle`	Trailing Angle	ANGLE	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCFaceMillTool

General Information


Property	Comments
`NLS name`	Face Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCFaceMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cutting_Diameter`	Non cutting diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCFrontalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	Frontal Groove Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCFrontalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Diameter`	Max Cut Diameter	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Min_Cut_Diameter`	Min Cut Diameter	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCGrooveInsert

General Information


Property	Comments
`NLS name`	Groove Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCGrooveInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bottom_Angle`	Bottom Angle	ANGLE	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Cut_Length`	Cut Length	ANGLE	-
`V_Flank_Angle_1`	Flank Angle 1	ANGLE	-
`V_Flank_Angle_2`	Flank Angle 2	ANGLE	-
`V_Insert_Height`	Insert Height	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius_1`	Nose Radius 1	LENGTH	-
`V_Nose_Radius_2`	Nose Radius 2	LENGTH	-

Example

PLMDELResNCISOInsert

General Information


Property	Comments
`NLS name`	ISO Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCISOInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-

Example

PLMDELResNCInternalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	Internal Groove Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCInternalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Hand_Angle`	Hand Angle	ANGLE	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Min_Diameter`	Min Diameter	LENGTH	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCInternalInsertHolder

General Information


Property	Comments
`NLS name`	Internal Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCInternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle_From_Insert`	Gauge Angle	ANGLE	-
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_ISO_Approach_Angle`	ISO Approach Angle	V_ISO_Approach_Angle_Enum	-
`V_ISO_Bar_Diameter`	ISO Bar Diameter	String	-
`V_ISO_Bar_Type`	ISO Bar Type	V_ISO_Bar_Type_Enum	-
`V_ISO_Clamp_System`	ISO Clamp System	V_ISO_Clamp_System_Enum	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Length`	ISO Length	V_ISO_Length_Enum	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Kappa_R`	Kappa R	ANGLE	-
`V_Leading_Angle`	Leading Angle	ANGLE	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Boring_Depth`	Max Boring Depth	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Max_Rec_Depth`	Max Rec. Depth	LENGTH	-
`V_Min_Diameter`	Min Diameter	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Trailing_Angle`	Trailing Angle	ANGLE	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCMachine

General Information


Property	Comments
`NLS name`	NC Machine Resource
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCMachine

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Controller`	Controller	String	-
`V_Number_of_spindles`	Number of spindles	Integer	-
`V_Number_of_turrets`	Number of turrets	Integer	-
`V_Type`	Type	V_Type_Enum	-

Example

PLMDELResNCMillAndDrillToolAssembly

General Information


Property	Comments
`NLS name`	Mill And Drill Tool Assembly
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCMillAndDrillToolAssembly

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Power`	Power	V_Power_Enum	-
`V_Tool_Gage`	Tool Gage	LENGTH	-

Example

PLMDELResNCMillingHead

General Information


Property	Comments
`NLS name`	Interchangeable Milling Head
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCMillingHead

Example

PLMDELResNCMultiDiamDrillTool

General Information


Property	Comments
`NLS name`	Multi Diameter Drill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCMultiDiamDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle2`	Cutting angle 2	ANGLE	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Chamfer_Diameter1`	Chamfer diameter 1	LENGTH	-
`V_Chamfer_Diameter2`	Chamfer diameter 2	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Length2`	Length 2	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Number_Of_Stages`	Number of stages	Integer	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCReamerTool

General Information


Property	Comments
`NLS name`	Reamer
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCReamerTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCRoundInsert

General Information


Property	Comments
`NLS name`	Round Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCRoundInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

PLMDELResNCSpindle

General Information


Property	Comments
`NLS name`	NC Spindle
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCSpindle

Example

PLMDELResNCSpotDrillTool

General Information


Property	Comments
`NLS name`	Spot Drill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCSpotDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCSquareInsert

General Information


Property	Comments
`NLS name`	Square Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCSquareInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

PLMDELResNCSubAssembly

General Information


Property	Comments
`NLS name`	Sub Assembly
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCSubAssembly

Example

PLMDELResNCTSlotterTool

General Information


Property	Comments
`NLS name`	T-Slotter
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTSlotterTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Corner_Radius2`	Upper corner radius	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Lower_Angle`	Bottom chamfer angle	ANGLE	-
`V_Lower_Diameter`	Bottom diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Upper_Angle`	Top chamfer angle	ANGLE	-
`V_Upper_Diameter`	Top diameter	LENGTH	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCTapTool

General Information


Property	Comments
`NLS name`	Tap
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTapTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nb_Of_Threads`	Number of threads	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Pitch_Of_Thread`	Pitch of thread	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Thread_Class`	Thread class	V_Thread_Class_Enum	-
`V_Thread_Class_Description`	Thread class description	String	-
`V_Thread_Form`	Thread form	V_Thread_Form_Enum	-
`V_Thread_Form_Description`	Thread form description	String	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCThreadExternalInsertHolder

General Information


Property	Comments
`NLS name`	External Thread Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCThreadExternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_ShiftX`	Gauge Shift on X	LENGTH	-
`V_Insert_ShiftZ`	Gauge Shift on Z	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCThreadInsert

General Information


Property	Comments
`NLS name`	Thread Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCThreadInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-
`V_Pitch_Number`	Pitch Number	Real	-
`V_Pitch_Of_Thread`	Pitch of Thread	LENGTH	-
`V_Thread_Angle`	Thread Angle	ANGLE	-
`V_Thread_Definition`	Thread Definition	V_Thread_Definition_Enum	-
`V_Thread_Profile`	Thread Profile	V_Thread_Profile_Enum	-
`V_Tooth_H`	Tooth H	LENGTH	-
`V_Tooth_X`	Tooth X	LENGTH	-
`V_Tooth_Z`	Tooth Z	LENGTH	-

Example

PLMDELResNCThreadInternalInsertHolder

General Information


Property	Comments
`NLS name`	Internal Thread Insert-Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCThreadInternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_ShiftX`	Gauge Shift on X	LENGTH	-
`V_Insert_ShiftZ`	Gauge Shift on Z	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Min_Diameter`	Min Diameter	LENGTH	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

PLMDELResNCThreadMillTool

General Information


Property	Comments
`NLS name`	Thread Mill
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCThreadMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Chamfer_Angle`	Chamfer angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nb_Of_Threads`	Number of threads	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Pitch_Of_Thread`	Pitch of thread	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Thread_Class`	Thread class	V_Thread_Class_Enum	-
`V_Thread_Class_Description`	Thread class description	String	-
`V_Thread_Form`	Thread form	V_Thread_Form_Enum	-
`V_Thread_Form_Description`	Thread form description	String	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

PLMDELResNCToolHolder

General Information


Property	Comments
`NLS name`	Tool Holder
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCToolHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bottom_Attachment`	Bottom Attachment	String	-
`V_Comment`	Comment	String	-
`V_Cone_Diameter_1`	Cone Diameter 1	LENGTH	-
`V_Cone_Diameter_2`	Cone Diameter 2	LENGTH	-
`V_Cone_Diameter_3`	Cone Diameter 3	LENGTH	-
`V_Cone_Diameter_4`	Cone Diameter 4	LENGTH	-
`V_Cone_Diameter_5`	Cone Diameter 5	LENGTH	-
`V_Diameter_1`	Diameter 1	LENGTH	-
`V_Diameter_2`	Diameter 2	LENGTH	-
`V_Diameter_3`	Diameter 3	LENGTH	-
`V_Diameter_4`	Diameter 4	LENGTH	-
`V_Diameter_5`	Diameter 5	LENGTH	-
`V_Diameter_6`	Diameter 6	LENGTH	-
`V_Holder_Length_1`	Length Holder 1	LENGTH	-
`V_Holder_Length_2`	Length Holder 2	LENGTH	-
`V_Holder_Length_3`	Length Holder 3	LENGTH	-
`V_Holder_Length_4`	Length Holder 4	LENGTH	-
`V_Holder_Length_5`	Length Holder 5	LENGTH	-
`V_Holder_Max_Gage`	Maximum Gage	LENGTH	-
`V_Nb_Of_Stages`	Number of stages	Integer	-
`V_Top_Attachment`	Top Attachment	String	-

Example

PLMDELResNCTriangularInsert

General Information


Property	Comments
`NLS name`	Triangular Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTriangularInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

PLMDELResNCTrigonInsert

General Information


Property	Comments
`NLS name`	Trigon Insert
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTrigonInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Comment`	Comment	String	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

PLMDELResNCTurningToolAssembly

General Information


Property	Comments
`NLS name`	Turning Tool Assembly
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTurningToolAssembly

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Number_Components`	Number Components	Integer	-
`V_Output_Preference_1`	Output Preference 1	V_Output_Preference_Enum	-
`V_Output_Preference_2`	Output Preference 2	V_Output_Preference_Enum	-
`V_Output_Preference_3`	Output Preference 3	V_Output_Preference_Enum	-
`V_Power`	Power	V_Power_Enum	-
`V_Tool_Inverted`	Tool Inverted	Integer	-
`V_Tool_Set_X`	Tool Set X	LENGTH	-
`V_Tool_Set_Y`	Tool Set Y	LENGTH	-
`V_Tool_Set_Z`	Tool Set Z	LENGTH	-
`V_Turret_Number`	Turret Number	Integer	-

Example

PLMDELResNCTurret

General Information


Property	Comments
`NLS name`	NC Turret
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTurret

Example

PLMDELResNCTwoSidesChamferingTool

General Information


Property	Comments
`NLS name`	Two Sides Chamfering Tool
`Extension`	-

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       PLMDELResNCTwoSidesChamferingTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle2`	Cutting angle 2	ANGLE	-
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

ResourceAdditiveTool

General Information


Property	Comments
`NLS name`	Additive Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceAdditiveTool

Example

ResourceNCAPTTool

General Information


Property	Comments
`NLS name`	Machining APT Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCAPTTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Height`	Height	LENGTH	-
`V_Horizontal_Distance`	Horizontal distance	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tip_Angle`	Tip angle	ANGLE	-
`V_Tool_Angle`	Tool angle	ANGLE	-
`V_Vertical_Distance`	Vertical distance	LENGTH	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

ResourceNCAccessory

General Information


Property	Comments
`NLS name`	Machining Accessory
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCAccessory

Example

ResourceNCAssembly

General Information


Property	Comments
`NLS name`	Machining Abstract Assembly
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCAssembly

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_FeedAndSpeed_Config`	Feed And Speed Configuration	String	-
`V_Top_Attachment`	Top Attachment	String	-

Example

ResourceNCBallStylusTool

General Information


Property	Comments
`NLS name`	Machining Ball Stylus Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCStylus
          ResourceNCBallStylusTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Length_Down`	Ball down length	LENGTH	-
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-

Example

ResourceNCBarrelMillTool

General Information


Property	Comments
`NLS name`	Machining Barrel Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCBarrelMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Barrel_Radius`	Barrel radius	LENGTH	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Radial_Distance`	Radial distance	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Vertical_Distance`	Vertical distance	LENGTH	-

Example

ResourceNCBoringAndChamferingTool

General Information


Property	Comments
`NLS name`	Machining Boring and Chamfering Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCBoringAndChamferingTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Chamfer_Diameter_1`	Chamfer diameter 1	LENGTH	-
`V_Composition_Drill`	Composition	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCBoringBar

General Information


Property	Comments
`NLS name`	Machining Boring Bar
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCBoringBar

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bore_Ability`	Boring ability	V_Bore_Ability_Enum	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Diameter`	Maximum diameter	LENGTH	-
`V_Min_Diameter`	Minimum diameter	LENGTH	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cut_Diameter`	Non cut diameter	LENGTH	-
`V_Tip_Angle`	Tip angle	ANGLE	-
`V_Tip_Length`	Tip length	LENGTH	-
`V_Tip_Radius`	Tip radius	LENGTH	-
`V_Tool_Angle`	Tool angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	V_Tooth_Material_Description	String	-

Example

ResourceNCCenterDrillTool

General Information


Property	Comments
`NLS name`	Machining Center Drill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCCenterDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Size_Designation`	Size designation	String	-
`V_Taper_Angle`	Taper angle	ANGLE	-

Example

ResourceNCConicalMillTool

General Information


Property	Comments
`NLS name`	Machining Conical Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCConicalMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Chamfer_Angle`	Chamfer angle	ANGLE	-
`V_Chamfer_Width`	Chamfer width	LENGTH	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Corner_Style`	Corner style	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCCounterboreMillTool

General Information


Property	Comments
`NLS name`	Machining Counterbore Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCCounterboreMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition`	Composition	V_Composition_Enum	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCCountersinkTool

General Information


Property	Comments
`NLS name`	Machining Countersink
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCCountersinkTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCCylinderStylusTool

General Information


Property	Comments
`NLS name`	Machining Cylinder Stylus Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCStylus
          ResourceNCCylinderStylusTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cylinder_Length`	Cylinder length	LENGTH	-

Example

ResourceNCDiamondInsert

General Information


Property	Comments
`NLS name`	Machining Diamond Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCDiamondInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCDrillTool

General Information


Property	Comments
`NLS name`	Machining Drill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCDrillingGenericInsert

General Information


Property	Comments
`NLS name`	Machining Generic Drilling Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCDrillingGenericInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Cut_Angle`	Cutting Angle	ANGLE	-
`V_Insert_Material_Gen`	Insert Material	String	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality_Gen`	Machining Quality	String	-
`V_Nominal_Diameter`	Nominal Diameter	LENGTH	-
`V_Overall_Length`	Overall Length	LENGTH	-
`V_Protruding_Length`	Protruding Length	LENGTH	-
`V_Tool_Tip_Length`	Tool Tip Length	LENGTH	-

Example

ResourceNCEndMillTool

General Information


Property	Comments
`NLS name`	Machining End Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCEndMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Chamfer_Angle`	Chamfer angle	ANGLE	-
`V_Chamfer_Width`	Chamfer width	LENGTH	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Corner_Style`	Corner style	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cutting_Diameter`	Non cutting diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCExternalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	Machining External Groove Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCExternalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Hand_Angle`	Hand Angle	ANGLE	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-

Example

ResourceNCExternalInsertHolder

General Information


Property	Comments
`NLS name`	Machining External Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCExternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle_From_Insert`	Gauge Angle	ANGLE	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Holder_Capability`	Holder Capability	V_Holder_Capability_Enum	-
`V_ISO_Approach_Angle`	ISO Approach Angle	V_ISO_Approach_Angle_Enum	-
`V_ISO_Clamp_System`	ISO Clamp System	V_ISO_Clamp_System_Enum	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Height`	ISO Height	String	-
`V_ISO_Length`	ISO Length	V_ISO_Length_Enum	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Width`	ISO Width	String	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Kappa_R`	Kappa R	ANGLE	-
`V_Leading_Angle`	Leading Angle	ANGLE	-
`V_Max_Rec_Depth`	Max Rec. Depth	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-
`V_Trailing_Angle`	Trailing Angle	ANGLE	-

Example

ResourceNCFaceMillTool

General Information


Property	Comments
`NLS name`	Machining Face Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCFaceMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Chamfer_Angle`	Chamfer angle	ANGLE	-
`V_Chamfer_Width`	Chamfer width	LENGTH	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Corner_Style`	Corner style	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Max_Plunge_Angle`	Max plunge angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Non_Cutting_Diameter`	Non cutting diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCFrontalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	Machining Frontal Groove Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCFrontalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Diameter`	Max Cut Diameter	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Min_Cut_Diameter`	Min Cut Diameter	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-

Example

ResourceNCGrooveInsert

General Information


Property	Comments
`NLS name`	Machining Groove Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCGrooveInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bottom_Angle`	Bottom Angle	ANGLE	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Cut_Length`	Cut Length	ANGLE	-
`V_Flank_Angle_1`	Flank Angle 1	ANGLE	-
`V_Flank_Angle_2`	Flank Angle 2	ANGLE	-
`V_Insert_Height`	Insert Height	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius_1`	Nose Radius 1	LENGTH	-
`V_Nose_Radius_2`	Nose Radius 2	LENGTH	-

Example

ResourceNCISOInsert

General Information


Property	Comments
`NLS name`	Machining ISO Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCISOInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-

Example

ResourceNCInsert

General Information


Property	Comments
`NLS name`	Machining Abstract Insert
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_FeedAndSpeed_Config`	Feed and speed configuration	String	-
`V_Insert_Interface_Code`	Insert Interface Code	String	-

Example

ResourceNCInternalGrooveInsertHolder

General Information


Property	Comments
`NLS name`	Machining Internal Groove Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCInternalGrooveInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_Gauging_Angle`	Gauging Angle	ANGLE	-
`V_Hand_Angle`	Hand Angle	ANGLE	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Max_Cut_Depth`	Max Cut Depth	LENGTH	-
`V_Max_Cut_Width`	Max Cut Width	LENGTH	-
`V_Min_Diameter`	Min Diameter	LENGTH	-

Example

ResourceNCInternalInsertHolder

General Information


Property	Comments
`NLS name`	Machining Internal Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCInternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle_From_Insert`	Gauge Angle	ANGLE	-
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Approach_Angle`	ISO Approach Angle	V_ISO_Approach_Angle_Enum	-
`V_ISO_Bar_Diameter`	ISO Bar Diameter	String	-
`V_ISO_Bar_Type`	ISO Bar Type	V_ISO_Bar_Type_Enum	-
`V_ISO_Clamp_System`	ISO Clamp System	V_ISO_Clamp_System_Enum	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Length`	ISO Length	V_ISO_Length_Enum	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Shift`	Gauge Shift	LENGTH	-
`V_Kappa_R`	Kappa R	ANGLE	-
`V_Leading_Angle`	Leading Angle	ANGLE	-
`V_Max_Boring_Depth`	Max Boring Depth	LENGTH	-
`V_Max_Rec_Depth`	Max Rec. Depth	LENGTH	-
`V_Min_Diameter`	Min Diameter	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Trailing_Angle`	Trailing Angle	ANGLE	-

Example

ResourceNCLensTool

General Information


Property	Comments
`NLS name`	Machining Lens Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCLensTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Barrel_Radius`	Barrel radius	LENGTH	-
`V_Composition`	Composition	String	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-

Example

ResourceNCMachine

General Information


Property	Comments
`NLS name`	Machining Abstract Machine
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMachine

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Controller`	Controller	String	-
`V_Number_of_spindles`	Number of spindles	Integer	-
`V_Number_of_turrets`	Number of turrets	Integer	-

Example

ResourceNCMillAndDrillToolAssembly

General Information


Property	Comments
`NLS name`	Machining Mill And Drill Tool Assembly
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCAssembly
          ResourceNCMillAndDrillToolAssembly

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Chamfer_Angle`	Chamfer Angle	ANGLE	-
`V_Chamfer_Width`	Chamfer Width	LENGTH	-
`V_Composition_TA`	Composition	String	-
`V_Corner_Radius`	Corner Radius	LENGTH	-
`V_Corner_Style`	Corner Style	String	-
`V_Cut_Length`	Cutting Length	LENGTH	-
`V_Item_Type`	Tool Type	String	-
`V_Nominal_Diameter`	Nominal Diameter	LENGTH	-
`V_Overall_Length`	Overall Length	LENGTH	-
`V_Power`	Power	V_Power_Enum	-
`V_Tool_Gage`	Tool Gage	LENGTH	-

Example

ResourceNCMillMachine

General Information


Property	Comments
`NLS name`	Machining Milling Machine
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMachine
          ResourceNCMillMachine

Example

ResourceNCMillTool

General Information


Property	Comments
`NLS name`	Machining Abstract Milling Tool
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Cutting_Item_Count`	Cutting item count	Integer	-
`V_FeedAndSpeed_Config`	Feed and speed configuration	String	-
`V_Insert_Interface_Code`	Insert Interface Code	String	-
`V_Length`	Length	LENGTH	-
`V_Master_Insert_Code`	Master insert code	String	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Radial_Tool_Rake_Angle`	Radial tool rake angle	ANGLE	-
`V_Row_Count`	Row count	Integer	-
`V_Tool_Rake_Angle`	Axial tool rake angle	ANGLE	-
`V_Tooth_Material`	Tooth material	V_Tooth_Material_Enum	-
`V_Top_Attachment`	Top Attachment	String	-
`V_Way_Of_Rotation`	Way of rotation	V_Way_Of_Rotation_Enum	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

ResourceNCMillTurnMachine

General Information


Property	Comments
`NLS name`	Machining Mill-Turn Machine
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMachine
          ResourceNCMillTurnMachine

Example

ResourceNCMillingGenericInsert

General Information


Property	Comments
`NLS name`	Machining Generic Milling Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCMillingGenericInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Chamfer_Angle`	Chamfer Angle	ANGLE	-
`V_Chamfer_Length`	Chamfer Length	LENGTH	-
`V_Corner_Style`	Corner Style	String	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Angle`	Insert Angle	ANGLE	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material_Gen`	Insert Material	String	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Insert_Type`	Insert Type	String	-
`V_Insert_Width`	Insert Width	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality_Gen`	Machining Quality	String	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCMillingHead

General Information


Property	Comments
`NLS name`	Machining Interchangeable Milling Head
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMillingHead

Example

ResourceNCMultiDiamDrillTool

General Information


Property	Comments
`NLS name`	Machining Multi Diameter Drill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCMultiDiamDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle2`	Cutting angle 2	ANGLE	-
`V_Chamfer_Diameter1`	Chamfer diameter 1	LENGTH	-
`V_Chamfer_Diameter2`	Chamfer diameter 2	LENGTH	-
`V_Composition_Drill`	Composition	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Length2`	Length 2	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Number_Of_Stages`	Number of stages	Integer	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCPowderBedMachine

General Information


Property	Comments
`NLS name`	Additive Powder Bed Machine
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMachine
          ResourceNCPowderBedMachine

Example

ResourceNCPrismaticToolHolder

General Information


Property	Comments
`NLS name`	Machining Prismatic Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCPrismaticToolHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bottom_Attachment`	Bottom Attachment	String	-
`V_Comment`	Comment	String	-
`V_Holder_Max_Gage`	Maximum Gage	LENGTH	-
`V_Top_Attachment`	Top Attachment	String	-

Example

ResourceNCReamerTool

General Information


Property	Comments
`NLS name`	Machining Reamer
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCReamerTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCRoundInsert

General Information


Property	Comments
`NLS name`	Machining Round Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCRoundInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCShank

General Information


Property	Comments
`NLS name`	Machining Abstract Shank
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant Syntax	String	-
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Interface_Code`	Insert Interface Code	String	-
`V_Insert_Type`	Insert Type	String	-
`V_Lgth_From_Insert`	Gauge Length	LENGTH	-
`V_Max_Mill_Length`	Max Mill Length	LENGTH	-
`V_Max_Mill_Time`	Max Mill Time	TIME	-
`V_Top_Attachment`	Top Attachment	String	-
`V_Weight_Syntax`	Weight Syntax	String	-

Example

ResourceNCSpindle

General Information


Property	Comments
`NLS name`	Machining Spindle
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCSpindle

Example

ResourceNCSpotDrillTool

General Information


Property	Comments
`NLS name`	Machining Spot Drill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCSpotDrillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCSquareInsert

General Information


Property	Comments
`NLS name`	Machining Square Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCSquareInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCStylus

General Information


Property	Comments
`NLS name`	Machining Abstract Probing Tool
`Extension`	-
`Specializable`
`Abstract`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCStylus

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Body_Diameter`	Body diameter	LENGTH	-
`V_Comment`	Comment	String	-
`V_Coolant_Syntax`	Coolant syntax	String	-
`V_Length`	Length	LENGTH	-
`V_Max_Mill_Length`	Max machining length	LENGTH	-
`V_Max_Mill_Time`	Max life time	TIME	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Overall_Length`	Overall length	LENGTH	-
`V_Stylus_Material`	Stylus material	String	-
`V_Stylus_Type`	Stylus type	String	-
`V_Top_Attachment`	Top Attachment	String	-
`V_Weight_Syntax`	Weight syntax	String	-

Example

ResourceNCSubAssembly

General Information


Property	Comments
`NLS name`	Machining Sub Assembly
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCSubAssembly

Example

ResourceNCTSlotterTool

General Information


Property	Comments
`NLS name`	Machining T-Slotter
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCTSlotterTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Ball_Type`	Ball-end tool	V_Ball_Type_Enum	-
`V_Composition`	Composition	V_Composition_Enum	-
`V_Corner_Radius`	Corner radius	LENGTH	-
`V_Corner_Radius2`	Upper corner radius	LENGTH	-
`V_Lower_Angle`	Bottom chamfer angle	ANGLE	-
`V_Lower_Diameter`	Bottom diameter	LENGTH	-
`V_Machining_Quality`	Machining quality	V_Machining_Quality_Enum	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-
`V_Upper_Angle`	Top chamfer angle	ANGLE	-
`V_Upper_Diameter`	Top diameter	LENGTH	-

Example

ResourceNCTapTool

General Information


Property	Comments
`NLS name`	Machining Tap
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCTapTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Composition_Drill`	Composition	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Effective_Length`	Effective length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nb_Of_Threads`	Number of threads	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Pitch_Of_Thread`	Pitch of thread	LENGTH	-
`V_Thread_Class`	Thread class	V_Thread_Class_Enum	-
`V_Thread_Class_Description`	Thread class description	String	-
`V_Thread_Form`	Thread form	V_Thread_Form_Enum	-
`V_Thread_Form_Description`	Thread form description	String	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCThreadExternalInsertHolder

General Information


Property	Comments
`NLS name`	Machining External Thread Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCThreadExternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_ShiftX`	Gauge Shift on X	LENGTH	-
`V_Insert_ShiftZ`	Gauge Shift on Z	LENGTH	-
`V_Shank_Cut_Width`	Shank Cut Width	LENGTH	-
`V_Shank_Height`	Shank Height	LENGTH	-
`V_Shank_Length_1`	Shank Length 1	LENGTH	-
`V_Shank_Length_2`	Shank Length 2	LENGTH	-
`V_Shank_Width`	Shank Width	LENGTH	-

Example

ResourceNCThreadInsert

General Information


Property	Comments
`NLS name`	Machining Thread Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCThreadInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Hand_Style`	Hand Style	V_Hand_Style_Enum	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-
`V_Pitch_Number`	Pitch Number	Real	-
`V_Pitch_Of_Thread`	Pitch of Thread	LENGTH	-
`V_Thread_Angle`	Thread Angle	ANGLE	-
`V_Thread_Definition`	Thread Definition	V_Thread_Definition_Enum	-
`V_Thread_Profile`	Thread Profile	V_Thread_Profile_Enum	-
`V_Tooth_H`	Tooth H	LENGTH	-
`V_Tooth_X`	Tooth X	LENGTH	-
`V_Tooth_Z`	Tooth Z	LENGTH	-

Example

ResourceNCThreadInternalInsertHolder

General Information


Property	Comments
`NLS name`	Machining Internal Thread Insert-Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCShank
          ResourceNCThreadInternalInsertHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bar_Cut_Radius`	Bar Cut Radius	LENGTH	-
`V_Bar_Length_1`	Bar Length 1	LENGTH	-
`V_Bar_Length_2`	Bar Length 2	LENGTH	-
`V_Body_Diameter`	Body Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_ShiftX`	Gauge Shift on X	LENGTH	-
`V_Insert_ShiftZ`	Gauge Shift on Z	LENGTH	-
`V_Min_Diameter`	Min Diameter	LENGTH	-

Example

ResourceNCThreadMillTool

General Information


Property	Comments
`NLS name`	Machining Thread Mill
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCThreadMillTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Chamfer_Angle`	Chamfer angle	ANGLE	-
`V_Composition_Drill`	Composition	String	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Length1`	Length 1	LENGTH	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nb_Of_Threads`	Number of threads	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Outside_Diameter`	Outside diameter	LENGTH	-
`V_Pitch_Of_Thread`	Pitch of thread	LENGTH	-
`V_Taper_Angle`	Taper angle	ANGLE	-
`V_Thread_Class`	Thread class	V_Thread_Class_Enum	-
`V_Thread_Class_Description`	Thread class description	String	-
`V_Thread_Form`	Thread form	V_Thread_Form_Enum	-
`V_Thread_Form_Description`	Thread form description	String	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCToolHolder

General Information


Property	Comments
`NLS name`	Machining Tool Holder
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCToolHolder

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Bottom_Attachment`	Bottom Attachment	String	-
`V_Comment`	Comment	String	-
`V_Cone_Diameter_1`	Cone Diameter 1	LENGTH	-
`V_Cone_Diameter_2`	Cone Diameter 2	LENGTH	-
`V_Cone_Diameter_3`	Cone Diameter 3	LENGTH	-
`V_Cone_Diameter_4`	Cone Diameter 4	LENGTH	-
`V_Cone_Diameter_5`	Cone Diameter 5	LENGTH	-
`V_Diameter_1`	Diameter 1	LENGTH	-
`V_Diameter_2`	Diameter 2	LENGTH	-
`V_Diameter_3`	Diameter 3	LENGTH	-
`V_Diameter_4`	Diameter 4	LENGTH	-
`V_Diameter_5`	Diameter 5	LENGTH	-
`V_Diameter_6`	Diameter 6	LENGTH	-
`V_Holder_Length_1`	Length Holder 1	LENGTH	-
`V_Holder_Length_2`	Length Holder 2	LENGTH	-
`V_Holder_Length_3`	Length Holder 3	LENGTH	-
`V_Holder_Length_4`	Length Holder 4	LENGTH	-
`V_Holder_Length_5`	Length Holder 5	LENGTH	-
`V_Holder_Max_Gage`	Maximum Gage	LENGTH	-
`V_Nb_Of_Stages`	Number of stages	Integer	-
`V_Top_Attachment`	Top Attachment	String	-

Example

ResourceNCTriangularInsert

General Information


Property	Comments
`NLS name`	Machining Triangular Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCTriangularInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCTrigonInsert

General Information


Property	Comments
`NLS name`	Machining Trigon Insert
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCInsert
          ResourceNCTrigonInsert

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Clear_Angle`	Clear Angle	ANGLE	-
`V_ISO_Clearance_Angle`	ISO Clearance Angle	V_ISO_Clearance_Angle_Enum	-
`V_ISO_Cut_Size`	ISO Cut Size	String	-
`V_ISO_Cutting_Condition`	ISO Cutting Condition	V_ISO_Cutting_Condition_Enum	-
`V_ISO_Direction`	ISO Direction	V_ISO_Direction_Enum	-
`V_ISO_Nose_Radius`	ISO Nose Radius	String	-
`V_ISO_Shape`	ISO Shape	V_ISO_Shape_Enum	-
`V_ISO_Thickness`	ISO Thickness	V_ISO_Thickness_Enum	-
`V_ISO_Tolerance`	ISO Tolerance	V_ISO_Tolerance_Enum	-
`V_ISO_Type`	ISO Type	V_ISO_Type_Enum	-
`V_Inscribed_Diameter`	Inscribed Diameter	LENGTH	-
`V_Insert_Length`	Insert Length	LENGTH	-
`V_Insert_Material`	Insert Material	V_Insert_Material_Enum	-
`V_Insert_Thickness`	Insert Thickness	LENGTH	-
`V_Life_Time`	Life Time	TIME	-
`V_Machining_Quality`	Machining Quality	V_Machining_Quality_Enum	-
`V_Nose_Radius`	Nose Radius	LENGTH	-

Example

ResourceNCTurningToolAssembly

General Information


Property	Comments
`NLS name`	Machining Turning Tool Assembly
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCAssembly
          ResourceNCTurningToolAssembly

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Hand_Style_TA`	Hand Style	String	-
`V_Insert_Type`	Insert Type	String	-
`V_Nose_Radius`	Nose Radius	LENGTH	-
`V_Number_Components`	Number Components	Integer	-
`V_Overall_Length`	Overall Length	LENGTH	-
`V_Power`	Power	V_Power_Enum	-
`V_Shank_Type`	Shank Type	String	-

Example

ResourceNCTurret

General Information


Property	Comments
`NLS name`	Machining Turret
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCTurret

Example

ResourceNCTwoSidesChamferingTool

General Information


Property	Comments
`NLS name`	Machining Two Sides Chamfering Tool
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCMillTool
          ResourceNCTwoSidesChamferingTool

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Angle2`	Cutting angle 2	ANGLE	-
`V_Composition_Drill`	Composition	String	-
`V_Cut_Angle`	Cutting angle	ANGLE	-
`V_Cut_Length`	Cutting length	LENGTH	-
`V_Entry_Diameter`	Entry diameter	LENGTH	-
`V_Nb_Of_Flutes`	Number of flutes	Integer	-
`V_Nominal_Diameter`	Nominal diameter	LENGTH	-
`V_Tool_Tip_Length`	Tool tip length	LENGTH	-
`V_Tooth_Description`	Tooth description	String	-
`V_Tooth_Material_Description`	Tooth material desc.	String	-

Example

ResourceNCWire

General Information


Property	Comments
`NLS name`	EDM Wire
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        ToolDevice
         ResourceNCWire

Attributes


Name used in EKL	NLS Name	Type	Comment
`V_Comment`	Comment	String	-
`V_Material_Description`	Material description	String	-
`V_Nominal_Diameter`	Diameter	LENGTH	-

Example

ResourceNCWireEDMMachine

General Information


Property	Comments
`NLS name`	Wire EDM Machine
`Extension`	-
`Specializable`
`New (EKL)`

Inheritance Path

ObjectType
 Feature
  DatabaseObjectType
   BusinessType
    PLMEntity
     PLMCoreReference
      VPMReference
       Resource
        NCMachine
         ResourceNCMachine
          ResourceNCWireEDMMachine

Example

V_Ball_Type_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Ball_Type_Enum

Enumerated Values


Value	NLS Value	Comment
`No`	No	-
`Yes`	Yes	-

Example

V_Bore_Ability_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Bore_Ability_Enum

Enumerated Values


Value	NLS Value	Comment
`MfgThrough`	Through	-
`Either`	Either	-

Example

V_Composition_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Composition_Enum

Enumerated Values


Value	NLS Value	Comment
`OnePiece`	One piece	-
`InsertHolder`	Insert holder(old)	-
`InsertHolderNew`	Insert holder	-

Example

V_Hand_Style_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Hand_Style_Enum

Enumerated Values


Value	NLS Value	Comment
`Right_Hand`	Right hand	-
`Left_Hand`	Left hand	-
`Neutral`	Neutral	-

Example

V_Holder_Capability_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Holder_Capability_Enum

Enumerated Values


Value	NLS Value	Comment
`Surface`	Surface	-
`Traverse`	Traverse	-
`Both`	Both	-

Example

V_ISO_Approach_Angle_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Approach_Angle_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`B`	B	-
`C`	C	-
`D`	D	-
`E`	E	-
`F`	F	-
`G`	G	-
`J`	J	-
`K`	K	-
`L`	L	-
`M`	M	-
`N`	N	-
`R`	R	-
`S`	S	-
`T`	T	-
`U`	U	-
`V`	V	-
`W`	W	-
`Y`	Y	-
`Undefined`	Undefined	-

Example

V_ISO_Bar_Type_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Bar_Type_Enum

Enumerated Values


Value	NLS Value	Comment
`S`	S	-
`A`	A	-
`B`	B	-
`D`	D	-
`C`	C	-
`E`	E	-
`F`	F	-
`G`	G	-
`H`	H	-
`J`	J	-
`Undefined`	Undefined	-

Example

V_ISO_Clamp_System_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Clamp_System_Enum

Enumerated Values


Value	NLS Value	Comment
`C`	C	-
`M`	M	-
`S`	S	-
`P`	P	-
`Undefined`	Undefined	-

Example

V_ISO_Clearance_Angle_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Clearance_Angle_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`B`	B	-
`C`	C	-
`D`	D	-
`E`	E	-
`F`	F	-
`G`	G	-
`N`	N	-
`P`	P	-
`Undefined`	Undefined	-

Example

V_ISO_Cutting_Condition_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Cutting_Condition_Enum

Enumerated Values


Value	NLS Value	Comment
`F`	F	-
`E`	E	-
`T`	T	-
`S`	S	-
`Undefined`	Undefined	-

Example

V_ISO_Direction_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Direction_Enum

Enumerated Values


Value	NLS Value	Comment
`Right`	Right	-
`Left`	Left	-
`Neutral`	Neutral	-
`Undefined`	Undefined	-

Example

V_ISO_Length_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Length_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`B`	B	-
`C`	C	-
`D`	D	-
`E`	E	-
`F`	F	-
`G`	G	-
`H`	H	-
`J`	J	-
`K`	K	-
`L`	L	-
`M`	M	-
`N`	N	-
`P`	P	-
`Q`	Q	-
`R`	R	-
`S`	S	-
`T`	T	-
`U`	U	-
`V`	V	-
`W`	W	-
`X`	X	-
`Y`	Y	-
`Undefined`	Undefined	-

Example

V_ISO_Shape_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Shape_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`B`	B	-
`C`	C	-
`D`	D	-
`E`	E	-
`H`	H	-
`K`	K	-
`L`	L	-
`M`	M	-
`O`	O	-
`P`	P	-
`R`	R	-
`S`	S	-
`T`	T	-
`V`	V	-
`W`	W	-
`X`	X	-
`Undefined`	Undefined	-

Example

V_ISO_Thickness_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Thickness_Enum

Enumerated Values


Value	NLS Value	Comment
`01`	01	-
`00`	00	-
`T1`	0T	-
`02`	02	-
`T3`	T3	-
`04`	04	-
`05`	05	-
`06`	06	-
`07`	07	-
`09`	09	-
`12`	12	-
`Undefined`	Undefined	-

Example

V_ISO_Tolerance_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Tolerance_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`C`	C	-
`E`	E	-
`F`	F	-
`G`	G	-
`H`	H	-
`J`	J	-
`K`	K	-
`L`	L	-
`M`	M	-
`N`	N	-
`U`	U	-
`Undefined`	Undefined	-

Example

V_ISO_Type_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_ISO_Type_Enum

Enumerated Values


Value	NLS Value	Comment
`A`	A	-
`B`	B	-
`C`	C	-
`F`	F	-
`G`	G	-
`H`	H	-
`J`	J	-
`M`	M	-
`N`	N	-
`Q`	Q	-
`R`	R	-
`T`	T	-
`U`	U	-
`W`	W	-
`X`	X	-
`Undefined`	Undefined	-

Example

V_Insert_Material_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Insert_Material_Enum

Enumerated Values


Value	NLS Value	Comment
`CoatedCarbide`	Coated Carbide	-
`Cermets`	Cermets	-
`Ceramics`	Ceramics	-
`CubideBoronNitide`	Cubide Boron Nitide	-
`Other`	Other	-

Example

V_Machining_Quality_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Machining_Quality_Enum

Enumerated Values


Value	NLS Value	Comment
`Rough`	Rough	-
`Finish`	Finish	-
`Either`	Either	-

Example

V_Output_Preference_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Output_Preference_Enum

Enumerated Values


Value	NLS Value	Comment
`P1`	P1	-
`P2`	P2	-
`P3`	P3	-
`P4`	P4	-
`P5`	P5	-
`P6`	P6	-
`P7`	P7	-
`P8`	P8	-
`P9`	P9	-
`P9R`	P9R	-
`MfgNone`	None	-

Example

V_Power_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Power_Enum

Enumerated Values


Value	NLS Value	Comment
`Fixed`	Fixed	-
`Powered`	Powered	-

Example

V_Thread_Class_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Thread_Class_Enum

Enumerated Values


Value	NLS Value	Comment
`1B`	1B	-
`2B`	2B	-
`3B`	3B	-
`5H`	5H	-
`6H`	6H	-
`7H`	7H	-
`Other`	Other	-

Example

V_Thread_Definition_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Thread_Definition_Enum

Enumerated Values


Value	NLS Value	Comment
`Pitch`	Pitch	-
`ThreadPerInch`	ThreadPerInch	-

Example

V_Thread_Form_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Thread_Form_Enum

Enumerated Values


Value	NLS Value	Comment
`Metric`	Metric	-
`Inch`	Inch	-
`Other`	Other	-

Example

V_Thread_Profile_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Thread_Profile_Enum

Enumerated Values


Value	NLS Value	Comment
`Trapezoidal`	Trapezoidal	-
`ISO`	ISO	-
`UNC`	UNC	-
`Gaz`	Gaz	-
`Other`	Other	-

Example

V_Tooth_Material_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Tooth_Material_Enum

Enumerated Values


Value	NLS Value	Comment
`HighSpeedSteel`	High speed steel	-
`CoatedHighSpeedSteel`	Coated high speed steel	-
`Carbide`	Carbide	-
`CoatedCarbide`	Coated carbide	-
`Other`	Other	-

Example

V_Type_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Type_Enum

Enumerated Values


Value	NLS Value	Comment
`MillMachine`	Milling Machine	-
`LatheMachine`	Lathe Machine	-
`MillTurnMachine`	MillTurn Machine	-

Example

V_Way_Of_Rotation_Enum

Inheritance Path

ObjectType
 Literal
  Enumere
   V_Way_Of_Rotation_Enum

Enumerated Values


Value	NLS Value	Comment
`RightHand`	Right hand	-
`LeftHand`	Left hand	-

DELMachiningResourceModel Types

Machining

Inheritance Path

Example

NCMachiningPgmFiles

Inheritance Path

Example

NCMachiningTemplate

General Information

Inheritance Path

Methods

Example

PLMDELResNCAPTTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCAccessory

General Information

Inheritance Path

Example

PLMDELResNCBallStylusTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCBarrelMillTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCBoringAndChamferingTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCBoringBar

General Information

Inheritance Path

Attributes

Example

PLMDELResNCCenterDrillTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCConicalMillTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCCounterboreMillTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCCountersinkTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCCylinderStylusTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCDiamondInsert

General Information

Inheritance Path

Attributes

Example

PLMDELResNCDrillTool

General Information

Inheritance Path

Attributes

Example

PLMDELResNCEndMillTool

General Information

Inheritance Path

Attributes