Location of Sketches in the Tree (Hybrid Design)

This topic provides you with the information you need to locate the sketches in the tree. It improves the visibility of your design process.

Up to Part Design Version 5 release 14 the sketches used for creating sketch-based features were located directly below the features in the specification tree. Now, to improve the visibility of your design process this behavior has changed: depending on how sketches are created, sketch entities are not necessarily displayed below the features they support.

The following are discussed:

This page discusses:

See Also
Sketch-Based Features

Sketch Entities Aggregated by Sketch-based Features

The sketches used for creating sketch-based features are aggregated by, or to put it in another way, located just below those features in the tree when:

  • You are working in a hybrid design environment.

  • You are using a sketch created prior to the feature

  • The sketch is not already aggregated by another feature

Sketch Entities Referenced by Sketch-based Features

  • Sketches are referenced by sketch-based features when these sketches are already aggregated by previous features. A pad can reference a sketch that was already used to create another pad.
  • Sketches are referenced by sketch-based features if these sketches are not directly located above the node of the features you are creating. A pad can be created using a sketch, if an intermediary feature, for example, a draft, was created after the sketch.

Specific Cases: Ribs, Slots, Multi-section Solids and Solid Combines

Ribs, slots, multi-section solids and solid combines require the use of two sketches at least.

  • If these sketches are successively located in the tree, then ribs, slots, multi-section solids, or solid combines created from the sketches aggregate them.
  • If an intermediary feature exists between the sketches, then ribs, slots, multi-section solids, or solid combines are created from only one sketch.

Specific Cases: Power Copies and User Features

When selecting a sketch-based feature to define a Power Copy or a User Feature, remember that:

  • If the sketch is aggregated (placed just below the feature in the tree), that sketch is included in the selection as shown under Inputs of components.
  • Otherwise, if the sketch is referenced, it is not therefore included in the definition of the power copy or user feature. If you need to include it because it will be requested at instantiation, do select it.

Reordering Sketch Locations

The rules mentioned above apply when you are creating sketch-based features. But when you are editing those features, at any time, you can modify the location of a sketch using the Reorder capability. This capability moves and repositions sketches at the location of your choice, provided that the location you choose does not affect the integrity of your 3D shape. The app provides a quick help for that. For more information, see Reordering Features and Reordering Sketch-Based Features.