End Style

This section describes the End Style tables and how you can customize them.

This page discusses:

Overview

This resource file is a discrete list of all possible end styles that can be used for a pipe/ tube for a single standard.

In Data Setup, this table should be assigned to:

  • when using file-based tables, the End Style item in the resource table of Piping/Tubing Design Resources with a Standard criteria.
  • when using Engineering Specification objects, the End Style item in the resource table of Piping/Tubing Specification Resources with a Standard criteria.

Table Description

To customize the table, enter all possible end styles of a pipe/tube for a single standard.

Important: You must create one table for each standard that you use.

File-Based Table

A typical End Style file-based table is shown below:

B-NUT
FLARED SLEEVE
FLARED TUBE
FLARELESS MALE
FLARELESS SLEEVE

Engineering Specification Table

A typical End Style Engineering Specification table is shown below:

End Style
B-NUT
FLARED SLEEVE
FLARED TUBE
FLARELESS MALE
FLARELESS SLEEVE

The column definition is as follow:

Column NameColumn TypeLink to TableLink to Column
End StyleString- -

The table has the following attribute:

  • Standard

Sample Resource File

The default location of Tubing_SSTL_EndStyle.xls is

..\startup\EquipmentAndSystems\Piping\Standard\SSTL\

Note: The app optional content is not automatically installed along with the code. Contact your administrator if you must install the files you need. For more information, see Install Optional Content. You can also see Installation and Setup:Install: 3DEXPERIENCE Platform: Installing 3DEXPERIENCE Platform Services for the First Time: Installing Services One-by-One: Native Apps: Installing Native Apps: Installing a Native App.

Where Used

Used in this appWhenIs seen as
Piping & Tubing 3D DesignCreating partsEnd Style list in Typed Part dialog box.
Piping & Tubing 3D DesignCreating objects using Add > ContentAttributes in the dialog box.
Piping & Tubing 3D DesignEditing propertiesAttributes in the dialog box.
Piping & Tubing 3D Part DesignUsing the Port Attribute Management optionAttributes in the dialog box.