Outside Diameter

This section describes the Outside Diameter tables and how you can customize them.

This page discusses:

Overview

This resource file is a discrete list of all possible outside diameters of a pipe or tube for a single standard.

In Data Setup, this table should be assigned to:

  • when using file-based tables, the Outside Diameter item in the resource table of Piping/Tubing Design Resources.
  • when using Engineering Specification objects, a specification in the resource table of Piping/Tubing Specification Resources.

Table Description

To customize the table, enter all possible outside diameters of a pipe or tube for a single standard.

Important: You must create one table for each standard that you use.

File-Based Table

A typical Outside Diameter file-based table is shown below:

6mm
8mm
10mm
12mm
14mm

Engineering Specification Table

A typical Outside Diameter Engineering Specification table is shown below:

Outside diameter
6mm
8mm
10mm
12mm
14mm

The column definition is as follow:

Column NameColumn TypeLink to TableLink to Column
Outside DiameterLength- -

The table has the following attribute:

  • Standard

Sample Resource File

The default location of Tubing_SSTL_OutsideDiameter.xls is

..\startup\EquipmentAndSystems\Piping\Standard\SSTL\

Note: The app optional content is not automatically installed along with the code. Contact your administrator if you must install the files you need. For more information, see Install Optional Content. You can also see Installation and Setup:Install: 3DEXPERIENCE Platform: Installing 3DEXPERIENCE Platform Services for the First Time: Installing Services One-by-One: Native Apps: Installing Native Apps: Installing a Native App.

Where Used

Used in this appWhenIs seen as
Piping & Tubing 3D Part DesignCreating partsOutside Diameter list in Typed Part dialog box.