Pipe Fabrication End Style

This section describes the Pipe Fabrication End Style tables and how you can customize them. The Flexible Pipe Fabrication End Style is also described.

This page discusses:

Overview

This section provides a brief overview of the Pipe Fabrication End Style tables.

The Pipe Fabrication End Style table allows selection of end style depending upon the standard and material.

In Data Setup, this table should be assigned to:

  • when using file-based tables, the Pipe Fabrication End Style item in the resource table of Piping/Tubing Design Resources.
  • when using engineering specifications objects, a specification in the resource table of Piping/Tubing Specification Resources.

Table Description

This section describes the customization options of the Pipe Fabrication End Style table.

File-Based Table

A typical Pipe Fabrication End Style file-based table is shown below:

V_Standard (string)DS_Material (string)V_EndStyle (string)Comments (string)
SSTLAluminumFLARED TUBE
SSTLAluminumSWAGED TUBE
SSTLNickelFLARED TUBE
SSTLNickelSWAGED TUBE
SSTLSteelFLARED TUBE
SSTLSteelSWAGED TUBE
SSTLSteelSTRAIGHT TUBE
SSTLTitaniumFLARED TUBE1/4in to 3/4in
SSTLTitaniumSWAGED TUBE1/4in to 1in
SSTLTitaniumSTRAIGHT TUBE
SSTLMMChromaFLARED TUBE
SSTLMMChromaSWAGED TUBE
SSTLMMCopperFLARED TUBE4mm to 20mm
SSTLMMCopperSWAGED TUBE4mm to 65mm
SSTLMMCopperSTRAIGHT TUBE

A typical Flexible Pipe Fabrication End Style file-based table is shown below.

V_Standard (string)DS_Material (string)V_EndStyle (string)Comments (string)
SSTLAluminumFITTING
SSTLNickelCRIMP-SOCKET
SSTLNickelCRIMP-OTC
SSTLTitaniumCRIMP-OTC
SSTLTitaniumCRIMP-TTC
SSTLTitaniumCRIMP-40
SSTLMMChromaCRIMP-OTC
SSTLMMChromaCRIMP-TTC
SSTLMMChromaCRIMP-40
SSTLMMChromaCRIMP-48
SSTLMMChromaCRIMP-SOCKET
SSTLMMCopperCRIMP-OTC
SSTLMMCopperCRIMP-TTC
SSTLMMCopperCRIMP-40
SSTLMMCopperCRIMP-48
SSTLMMCopperCLAMPS

To customize the table, enter a line in the spreadsheet for each standard in every material that you use.

ParameterTypeImportanceInput / OutputDescription
V_StandardStringRequiredInputUsed for filtering
DS_MaterialStringRequiredInputUsed for filtering
V_EndStyleStringRequiredOutputEnter value required for each standard and material
CommentsStringOptionalOutputProvides information only.

Engineering Specification Table

A typical Pipe Fabrication End Style Engineering Specification table is shown below:

MaterialMaterial CategoryEnd Style
AluminumAluminumFLARED TUBE
AluminumAluminumSWAGED TUBE
NickelNickelFLARED TUBE
NickelNickelSWAGED TUBE
Stainless steelSteelFLARED TUBE
Stainless steelSteelSWAGED TUBE
SteelSteelSTRAIGHT TUBE
TitaniumTitaniumFLARED TUBE
TitaniumTitaniumSWAGED TUBE
TitaniumTitaniumSTRAIGHT TUBE
ChromaChromaFLARED TUBE
ChromaChromaSWAGED TUBE
CopperCopperFLARED TUBE
CopperCopperSWAGED TUBE
CopperCopperSTRAIGHT TUBE

A typical Flexible Pipe Fabrication End Style Engineering Specification table is shown below:

MaterialEnd Style
AluminumFITTING
NickelCRIMP-SOCKET
NickelCRIMP-OTC
TitaniumCRIMP-OTC
TitaniumCRIMP-TTC
TitaniumCRIMP-40
ChromaCRIMP-OTC
ChromaCRIMP-TTC
ChromaCRIMP-40
ChromaCRIMP-48
ChromaCRIMP-SOCKET
CopperCRIMP-OTC
CopperCRIMP-TTC
CopperCRIMP-40
CopperCRIMP-48
CopperCLAMPS

The columns definitions are as follow:

Column NameColumn TypeLink to TableLink to Column
MaterialMaterialMaterialMaterial
End StyleStringEnd StyleEnd Style

The tables have the following attributes:

  • Standard
  • Max temperature
  • Min temperature
  • Max pressure
  • Min pressure
  • Fluid
  • Fluid category

Sample Resource File

This section explains where to find the sample resource file.

The default location of XXX_XXX_PipeFabricationEndStyle.xls is

..\startup\EquipmentAndSystems\Piping\Specification\

and then the relevant specification, such as SS150R.

Note: The app optional content is not automatically installed along with the code. Contact your administrator if you must install the files you need. For more information, see Install Optional Content. You can also see Installation and Setup:Install: 3DEXPERIENCE Platform: Installing 3DEXPERIENCE Platform Services for the First Time: Installing Services One-by-One: Native Apps: Installing Native Apps: Installing a Native App.

Where Used

Used in this appWhenIs seen as
Piping & Tubing 3D DesignRouting pipes/tubes Unseen - creates pipes/tubes ends
Piping & Tubing 3D DesignEditing endstyle on port