Rating

This section describes the Rating tables and how you can customize them.

This page discusses:

Overview

This resource file is a discrete list of all possible ratings of a part, pipe or tube for a single standard.

In Data Setup, this table should be assigned to:

  • when using file-based tables, the Rating item in the resource table of Piping/Tubing Design Resources with a Standard criteria.
  • when using Engineering Specification objects, the Rating item in the resource table of Piping/Tubing Specification Resources with a Standard criteria.

Table Description

To customize the table, enter all possible ratings of a part, pipe or tube for a single standard.

Important: You must create one table for each standard that you use.

File-Based table

A typical Rating file-based table is shown below:

50Bar
100Bar
200Bar
275Bar
350Bar

Engineering Specification Table

A typical Rating Engineering Specification table is shown below:

Rating
50Bar
100Bar
200Bar
275Bar
350Bar

The column definition is as follow:

Column NameColumn TypeLink to TableLink to Column
RatingString- -

The table has the following attribute:

  • Standard

Sample Resource File

The default location of Tubing_SSTL_Rating.xls is

..\startup\EquipmentAndSystems\Piping\Standard\SSTL\

Note: The app optional content is not automatically installed along with the code. Contact your administrator if you must install the files you need. For more information, see Install Optional Content. You can also see Installation and Setup:Install: 3DEXPERIENCE Platform: Installing 3DEXPERIENCE Platform Services for the First Time: Installing Services One-by-One: Native Apps: Installing Native Apps: Installing a Native App.

Where Used

This resource file is used and seen here:

Used in this appWhenIs seen as
Piping & Tubing 3D Part DesignPart creationRating list in Typed Part dialog box.