Tree
- Parameters
- Select this check box to display in the tree the formula
parameters used in the drawing.
 By default, this check box is selected.
- Relations
- Select this check box to display in the tree the relation
parameters used in the drawing.
By default, this check box is selected.
- Generative view specifications
- Select this check box to display generative view specifications
in the tree, such as:
-
- Auxiliary view
- Breakout
- Broken
- Clipping (exact or quick clipping)
- 3D clipping (box, slice, or back-plane)
- Detail view (circular or polygonal profile)
- Offset or aligned section view or section cut
By default, this check box is selected.
- Callouts
- Select this check box to display callouts in the tree.
- Auxiliary callouts
- Section callouts
- Detail callouts
By default, this check box is selected.
- Fix together
- Select this check box to display the Fix together constraints in
the tree.
By default, this check box is selected.
- 2D component instances
- Select this check box to display the 2D component instances in
the tree.
By default, this check box is selected.
- Reports
- Select this check box to display reports such as bill of material
in the tree.
By default, this check box is selected.
Elements Analysis
- Activate elements' analysis
- Select this check box to display elements (such as dimensions, geometries, callouts,
weldings, and patterns) with different colors according to their types.
- Click
Configure to configure elements' analysis in
the
Element's Analysis dialog box. For more information, see
Elements Analysis.
By default, this check box is selected.
- Activate geometries' diagnostic
- Select this check box if you want over-constrained, inconsistent, not-changed, or iso
constrained elements to be identified using specific colors.
In addition, you can click the Configure to customize the colors to be used. Under
Dimensions, you can assign the required colors to the selected dimension
types. You can visualize the different types of dimensions using their
assigned colors. Click Configure to configure
geometries' diagnostic in the Geometries' Diagnostic
dialog box. For more information, see Diagnostic Colors.
By default, this check box is selected.
|