Displaying Status between Cableways and Trays

You can display the status and description of a segment at tray level.

Before you begin: Open a product and launch the Compute Relation between Cableway and Tray command to generate the association between objects.
See Also
Cableway Segment and Tray Link Information
Computing Associations between Cableways and Trays
  1. From the Fluid Design section of the action bar, click Display Status between Cableway and Tray .

    The Compute Cableway and Tray Link Status panel appears and displays two tabs:

    • Cableway: show the status of the segments. The trays associated are listed under each segment.
    • Tray: shows the status of the trays. The segments associated are listed under each tray.

    Each tab contains 4 columns:

    • Segment Tray Map: provides the name of the tray or segment.
    • Status: each color give an information about the status.
      • Green: the object is fully associated.
      • Yellow: the object is partially associated.
      • Red: there is no association.
    • Detail Description: gives further information about the status.
    • Action: you can check the box to select the line. This action check allows you to ensure the line has been corrected.
      Note: The box selection remains until you flush.

  2. Optional: Select the Action box when a segment or a tray is selected.

  3. Optional: To sort the data, click the Status column.