Creating Hooks

You can create hooks.

Before you begin: Create a rebar.
See Also
About Handling Extremities
About Hooks
Creating a Fixed Rebar Layer
  1. In the Rebar Creation dialog box, click the Extremities tab.
  2. To specify start and end hooks, select the Hook check boxes.
  3. Optional: Modify the default radius, angle and length value.
  4. Determine the limitation mode for the hook from the following:
    • At extremity: Creates the hook at the extremity.
    • From extremity: A normal plane to the wire extremity is computed internally and hook is created tangent to this plane

The start hook (identified in yellow) and the end hook (identified in orange) are specified accordingly.