About Connection Sets

This topic provides basic information about connection sets.

This page discusses:

See Also
Creating End Cuts
Creating Slots and Collars

Overview

The information of all the connections (such as end cuts, slots) is stored and managed in the ConnectionSet.

The ConnectionSet appears only once in the tree, regardless of the number of end cuts or slots in the work area.

If an object such as a bulkhead is moved, the end cut does not move with the bulkhead, and remains where placed originally in the work area. So you must update ConnectionSet.

Update Connection Set

To update ConnectionSet information, right-click the ConnectionSet and select ConnectionSet Object > Update.

A message box indicates the information is updated. After clicking OK, the end cut moves beside stiffener, wherever appropriate.