About Accessing the Reference Plane Browser

The reference plane browser lets you select the reference planes for creating structure objects. It is accessible only from the context menu.

See Also
About Using Reference Planes Browser

The table below lists the various commands in which the reference plane browser is available:

Command Contextual command accessible from
Grid The Support box
Panel
  • The Support box
  • The Limits area
Parametric Panel
  • The Support box
  • The Limits area
(Only for Multi Limits positioning mode)
Stiffener
  • The Support box
  • The Limits area
Stiffener on Free Edge The Limits area
Beam Point and Length
  • The Direction box
  • The Limits area
Point to Point The Limits area
Point and Limit
  • The Limit box
  • The Direction box
  • The Limits area
Curve The Limits area
Beams and plane
  • The Plane box
  • The Limits area
Reference Planes
  • The Limits area
  • The Transversal and the Longitudinal location boxes
Seam Panel The Splitting Object box
Break Panel The Splitting Object box
Break Profile The Splitting Object box
Advanced Copy Translation mode
  • The Source box
  • The Destination box
Symmetry mode The Plane box
Opening on Panel The References area (only for the Standard method)
Opening on Profile The References area (only for the Standard method)
Flange The Limits area