End Cut Dialog Box

The End Cut dialog box appears when you click EndCut in the Detail section of the action bar. It provides various options to place end cut on stiffener.

This dialog box contains controls for:

This page discusses:

See Also
Creating End Cuts

Profile

The Profile box displays the number of elements selected.

All the Extremities selected are listed under Profile in the table.

The placed in front of Profile box can be used for listing the selected elements.

You can replace or remove the previously selected element using this option and close the window.

Extremity

The Extremity box displays if it a Start extremity or a End extremity.

End Cut

The End Cut column list the end cut placed for the respective element at respective extremity. If the end cut is not defined it displays None.

Tip: Simply click on the header of the respective column to sort the list by Profile, Extremity, End Cut.

Define Feature and Parameters

Right-click the extremity and select Define End Cut > More. The Define Feature and Parameters dialog box displays.

Type
You can select the type of the end cut in the Type list.
Name
In the Name list, select an end cut. The list is customized depending upon the stiffener profile and the type of end cut.

The Table Browser for selection of endcut appears when you click More in the Name box.

  • This list is generated from the endcut table defined in the Resources Catalog or the Resources Library resource, set in Data Setup.
  • If no Resources Catalog or Resources Library resource is set in Data Setup, the Type list becomes unavailable and you can click More... in the Name list:
    • To select the required endcut reference from the catalog/library, if the Structure Reference Catalog or the Structure Reference Library resource is set in Data Setup.
    • To search the required endcut reference in the database, if no Structure Reference Catalog or Structure Reference Library resource is set in Data Setup.
  • Filters are applied depending upon the Stiffener Type and Endcut Type.
  • + sign near EndCut Name and EndCut Type indicates the filter applied. Click Reset Filter to remove filter.
Parameters
The Parameter tab contains the list of Parameter name, Parameter Value and Locked / Unlocked status.
Important: The options in Type, Name and Parameters list is generated from the EndCut Table defined in Data Setup.