-
From the Objectives & Constraints section of the action bar,
click Fastener Force Constraint
.
- Optional:
Enter a descriptive
Name.
-
Select the support for which you want to constrain the fastener force.
-
Select the Loading.
You define the loading by selecting a step or load case that is used to compute the
fastener force. The default is all load cases.
-
Enter a maximum value for the Axial force.
-
Enter a maximum value for the Shear force.
-
Click OK.
The fastener axial and shear forces are constrained to be no
more than the maximum values that you entered.