CATAnalysis documents |
3DEXPERIENCE database |
Partially imported |
Sections
|
|
|
3D property |
Solid section
|
|
Material Orientation: None |
Fully imported |
Material Orientation: Axis |
Fully imported |
Material Orientation: Surface |
Fully imported |
2D property |
Shell section
|
|
Thickness |
Fully imported |
Offset |
Fully imported Note:
Offset is not available with Membrane and
Shear Panel sections.
|
Data mapping |
Fully imported
Note:
The mapping data is imported only if the mapping data file exists at the
specified location.
|
1D property |
Beam section and Beam profile for all except Profile
Type: Bar, which is a 1D Link section. |
|
Profile Type: Cylindrical |
Fully imported |
Profile Type: Tubular |
Fully imported |
Profile Type: Rectangular |
Fully imported |
Profile Type: Thin box |
Fully imported |
Profile Type: Thin U |
- |
Profile Type: Thin I |
Fully imported |
Profile Type: Thin T |
Fully imported |
Profile Type: Thin X |
- |
Profile Type: User defined beam |
- |
Profile Type: Beam from surface |
- |
Profile Type: Bar |
Fully imported |
Profile Type: Variable beam |
- |
Offset: None |
|
- |
Offset: Customized |
|
- |
Released DOF: None |
|
- |
Released DOF: Customized |
|
- |
Variable beam factors |
|
- |
Imported composite property |
Composite shell
section |
|
Analysis: By Zone |
Fully imported |
Analysis: By Ply |
Fully imported |
Core sampling depth |
Fully imported |
Symmetrical |
Fully imported |
Imported beam property |
- |
- |
Mapping property |
- |
- |
Virtual part |
Coupling |
|
Smooth |
Coupling (Distributing) |
Fully imported |
Rigid |
Coupling (Kinematic) |
Fully imported |
Contact |
Virtual contact feature (Abstraction shape) |
Fully imported Note:
If the handler point is specified, it is
also imported. If it is not specified, the center of mass is used as the handler
point.
|
Rigid-Spring |
Coupling (Kinematic + Linear
general) |
Fully imported |
Smooth-Spring |
Coupling (Distributing + Linear
general) |
Fully imported |
Axis System Type: Global |
|
Fully imported |
Axis System Type: User |
|
Fully imported |
Periodicity condition |
- |
- |
|
|
|
Connections |
|
|
Rigid Connection property |
Coupling (Kinematic) |
Fully imported |
Smooth Connection property |
Coupling (Kinematic) |
Fully imported |
Slider Connection property |
- |
- |
Contact Connection property |
Surface-based contact + Contact interaction
property Note:
Both sides of the surface are considered for the
contact definition.
|
Fully imported |
Fastened connection property |
Tie |
Fully imported |
Fastened spring connection
property |
- |
- |
User-defined connection
property |
- |
- |
Bolt tightening connection
property |
Connector + Connector Load (in Step 1) + Connector
Restraint (in Step 2) |
Fully migratedNotes:
Bolt tightening connection
properties are now distributed among the following dialog boxes and settings:
- Connector:
- Type: Translator is
selected.
- Axis system: Specify
(along the axis of the bolt) is selected.
A proximity group is created under mesh parts. Nodes of overlapping areas
of the bolt and nut are included in the group.
- Connector Force: Step 1 is a general static step
along with other restraints.
- Connector Displacement: Step 2 is a general static
step along with other loads.
The connector load and connector restraint use the connector feature created
in the FEM representation as their support.
|
Pressure fitting connection property
|
- |
- |
Virtual bolt tightening connection
property |
Virtual bolt + Bolt load + Bolt
restraint |
The import depends on the presence of contact definition in the model:
- In the presence of frictional contact, a bolt force and V5 case-restraints
is created under first step and a bolt restraint and V5 case-loads is created
in the second step.
- In the absence of contact or frictionless contact, a bolt force, V5 case
restraints and V5 case loads is created under first step. There are no
additional steps and bolt restraints.
|
Virtual Spring Bolt Tightening Connection
Property |
- |
- |
Spot weld connection property |
Point fastener |
Fully imported |
Seam weld |
|
|
Type: Shell, hexahedron |
Line fastener |
Fully imported |
Type: Rigid, beam, spring |
Point fastener |
Fully imported |
Type: Contact |
- |
- |
Surface welding connection
property |
- |
- |
Nodes to Nodes Connection
Property |
- |
- |
Node Interface Property |
- |
- |
|
|
|
Restraints |
|
|
Clamp |
Clamp |
Fully imported |
Surface slider |
Slider and/or displacement
restraint |
Fully imported
Note:
Slider is applied on planar surfaces. Displacement restraint is applied on
cylindrical surfaces with cylindrical axis system.
|
Slider |
- |
- |
Sliding pivot |
- |
- |
Ball joint |
- |
- |
Pivot |
- |
- |
User-defined restraint |
Displacement restraint |
Fully imported |
Isostatic restraint |
- |
- |
|
|
|
Loads |
|
|
Pressure |
Pressure |
Fully imported |
Pressure with data mapping |
Pressure with data mapping |
Fully imported
Note:
The mapping data will be imported only if the mapping data file exists at the
specified location.
|
Distributed force |
Remote force |
Fully imported |
Moment |
Torque |
Fully imported |
Bearing load |
Bearing load |
Fully imported |
Imported force |
- |
- |
Imported moment |
- |
- |
Acceleration |
Gravity |
Fully imported |
Rotation force |
Rotational Acceleration Force + Centrifugal
Force |
Fully imported |
Line force density |
- |
- |
Surface force density |
- |
- |
Volume force density |
- |
- |
Force density / Force |
Force |
Fully imported
Note:
If the support of the force is a 1-dimensional object (e.g. edge), it is
migrated to a Remote Force.
|
Enforced displacement |
Applied translation + Applied
rotation
|
Fully imported |
Temperature field |
Prescribed temperature |
Fully imported |
Temperature field with data mapping |
Prescribed temperature with data mapping |
Fully imported
Note:
The mapping data is imported only if the mapping data file exists at the
specified location.
|
Temperature field from thermal
solution |
- |
- |
Combined loads |
- |
- |
Assembled loads |
- |
- |
|
|
|
Dynamic Excitation |
|
|
Damping |
Damping |
Fully imported |
Load excitation |
- |
- |
Restraint excitation |
- |
- |
Modulation |
- |
- |
|
|
|
Masses |
|
|
Distributed mass / Mass |
Point inertia (when support is 0-dimensional)
Mass per unit length (when support is 1D)
Mass per unit area (when support is 2D)
|
Fully imported |
Line mass |
Mass per unit length |
Partially imported |
Surface mass |
Mass per unit area |
Partially imported |
Distributed mass and inertia |
Point inertia (when support is 0-dimensional and no
handler point is selected)
Remote inertia for all other configurations with
homogeneous supports. (Supports cannot include mixed types.)
|
Partially imported |
Combined masses |
- |
- |
Assembled masses |
- |
- |