Configuring the Post-Execute Parameters

You can modify selected parameters in the simulation activity after running the CST simulation by mapping CST output variables to the activity parameters. For example, you can map a CST output parameter that holds the electromagnetic field S-parameter to a parameter in the simulation activity and use the parameter as input to an optimization.

See Also
Executing a CST Simulation
  1. From the Applications section of the action bar, click CST and drop it on the process diagram.
  2. Double-click CST .
  3. From the CST editor that appears, select the Post-Execute tab.
  4. To map a CST output variable to an activity parameter with the same name, do the following:
    1. Click in the Select column for each parameter that you want to add.
    2. Click OK.
      Automation Process Composer creates the parameter with the same mode and type.
  5. To map a CST output variable to an existing activity parameter, do the following:
    1. Select the Activity Parameter column.
    2. From the list, select the existing activity parameter to which you want to map.
    3. Click OK.
  6. To map a CST output variable to a new activity parameter, do the following:
    1. Select the Activity Parameter column.
    2. Select Create new.
      The Create New panel appears.
    3. Enter the parameter name.
    4. Optional: Edit the type and mode.
    5. Click OK.
      Automation Process Composer creates the activity parameter to the activity and maps it to the CST parameter.
  7. Click OK to save your changes and to close the CST editor.