Geometric Operations Section

The Geometric Operations section of the action bar provides commands for executing functional design of steel outfitting. This section is available when you are at the representation level.



Geometrical Set
Creates a geometrical set.
See Generative Shape Design User's Guide: Managing Geometrical Feature Sets: Managing Geometrical Sets.


Positioned Sketch
Creates a positioned sketch.
See Sketcher User's Guide: Before You Begin: Creating a Positioned Sketch.


Point
Creates a point.
See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Points.


Line
Creates a line.
See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Lines.


Plane
Creates a plane.
See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Planes.


Projection
Creates a geometry by projecting one or more elements onto a support.
See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Projections.


Intersection
Creates a geometry from the intersection of elements such as wireframe elements, volumes, and surfaces.
See Generative Shape Design User's Guide: Creating Wireframe Geometry: Creating Intersections.


Sweep
Creates a swept surface when you select the prerequisites like the profile, the guide curve, and the reference surface.
See Generative Shape Design User's Guide: Creating Surfaces: Creating Swept Surfaces.


Extrude
Creates a surface by extruding a profile along a given direction.
See Generative Shape Design User's Guide: Creating Surfaces: Creating Extruded Surfaces.


Fill
Creates a fill surface by filling a closed boundary consisting of a number of segments.
See Generative Shape Design User's Guide: Creating Surfaces: Creating Fill Surfaces.


Join
Assembles adjacent curves or adjacent surfaces to make one element.
See Generative Shape Design User's Guide: Performing Operations on Shape Geometry: Joining Curves or Surfaces.


Split
Splits a surface, a wireframe element, or a volume using a cutting element.
See Generative Shape Design User's Guide: Performing Operations on Shape Geometry: Splitting Geometry.


Trim
Trims two or more surfaces or wireframe elements, by cutting each other interactively.
See Generative Shape Design User's Guide: Performing Operations on Shape Geometry: Trimming Geometry.