- Perform either of the following operations
in the View Layout section of the action bar:
- To create a quick detail view using a sketched profile,
click Quick Detail View Profile
 . - To create a detail view using a circle as callout, click
Quick Detail View
 .
In the
Creation Options panel, you can select the graphic
properties and the operator specifications that you can propagate to this view
from its reference view. If the
Disable generative view style usage check box is
cleared in
tab, then you can also apply the available generative view styles to this view.
For more information, see
Creating a View using Generative View Styles.
In this scenario, create a quick detail view using
a sketched profile.
- Select the points required for sketching a polygon. If you are creating a detail view using a circle as callout,
click the callout center.
- Double-click to end the cutting profile creation.
Note that
if you do not close the profile, it is automatically closed. If you are creating a detail view using a circle as callout,
drag to select the callout radius and click a point to end the selection.
- Optional: Select the 2D generative edge in this view to create an associative detail profile.
A message appears at the top right corner of the screen informing that the detail view is now associated with the selected generative item. For more information, see About Detail Views. - Click to generate the quick detail view.
The associative detail view is created and the message disappears automatically once you indicate the location of the resultant detail view by clicking at the appropriate location in the sheet. Unlike a detail view
 ,
the profile is entirely closed. Note:
The default value of scale is 2 (twice the scale of the active view). You can modify this scale from the Properties dialog box.
- To modify the scale, right-click the detail view, select Properties, in the View tab.
- Enter the required Scale and
then click OK.
|
> Preferences > App Preferences > 3D Modeling > Mechanical Systems
tab, then you can also apply the available generative view styles to this view.
For more information, see
Creating a View using Generative View Styles.
