Creating Trigger Zones

You can create trigger zones.

This task shows you how to:

Before you begin: Create an experience.
See Also
About Trigger Zones
Editing Trigger Zones

Create a Cube-Shaped Trigger Zone

You can create a cube-shaped trigger zone.

  1. From the Assemble section of the action bar, click Cube Trigger Zone .
  2. Click to place the first corner of the cube.
  3. Move the pointer diagonally to the opposite corner.

  4. Click and extrude the rectangle.

    The cube-shaped trigger zone is created.

Create a Sphere-Shaped Trigger Zone

You can create a sphere-shaped trigger zone.

  1. From the Assemble section of the action bar, click Sphere Trigger Zone .
  2. Click to place the center of the sphere.

  3. Move the pointer to set the radius.
    The sphere-shaped trigger zone is created.

Create a Cylinder-Shaped Trigger Zone

You can create a cylinder-shaped trigger zone.

  1. From the Assemble section of the action bar, click Cylinder Trigger Zone .
  2. Click to place the center of one end of the cylinder.
  3. Move the pointer and click to set the radius.


  4. Move the pointer vertically to set the height and click.

    The cylinder-shaped trigger zone is created.

Create a Capsule-Shaped Trigger Zone

You can create a capsule-shaped trigger zone.

  1. From the Assemble section of the action bar, click Capsule Trigger Zone .
  2. Click to place the center of the capsule.
  3. Move the pointer and click to set the radius.


  4. Move the pointer vertically and click to adjust the height.

    The capsule-shaped trigger zone is created.