You can Update IPM (in-process models) in a batch mode, and save
all the manufacturing features created into a database. This does not do the update if you have
not done MBOM Generation, and Part Planning.
Before you begin: The session data must include a track on a product in a
simulation context.
From the Tools section of the action bar,
select Utility
.
The Batch Monitor dialog box appears.
Scroll down and double-click Heavy Industry Manufacturing
Options
The Heavy Industry Manufacturing Operations dialog box
appears.
Select the check box for Update IPM (clear the one that is
active).
Note:
By selecting the Update IPM operation, the other operation
options are disabled. However, by selecting any other operation from the workshop docs
extraction, the Update IPM operation disables.
Click 3DEXPERIENCE Platform Object Search
.
The TST Object Management dialog box appears.
Note:
You
can search the required manufacturing assembly in the database where part planning
completes in Simplified
Mode. Click Run to generate the manufacturing features
in the flattened part directly.
In Object, select Manufacturing
Assembly
Click OK.
The Object selection frame in the Heavy
Industry Manufacturing Operations dialog is loaded with a
Manufacturing Assembly.
Select the Manufacturing Assembly.
Click Run.
This creates manufacturing features for all manufactured parts under the
selected Manufacturing Assembly are saves to the database. A report
is created in the directory mentioned in the Report Directory
editor.
Click OK.
The report shows the content for the separate processes: