Mill and Drill Assembly
MfgMillAndDrillToolAssembly resource attributes are described below.
Base Attributes
Geometry Attributes
These attributes characterize the assembly shape and have an impact on the collision detection capability.
- MFG_DIAMETER_1 (Diameter 1 : D1)
-
Type: Real
Specifies the maximum diameter of the tool.
- MFG_DIAMETER_2 (Diameter 2 : D2)
-
Type: Real
Specifies the maximum diameter of the adapter or holder depending on the number of components on the tool assembly.
- MFG_DIAMETER_3 (Diameter 3 : D3)
-
Type: Real
Specifies the maximum diameter of the tool assembly holder. It is valuated only if the number of components is 3.
- MFG_TL_SET_LGTH (Total set length : ST)
-
Type: Real
Specifies the total set length of the tool assembly.
- MFG_TL_SET_X (Set X)
-
Type: Real
Specifies the X component of the total set length of the tool assembly. The manufacturing attribute is MFG_TL_SET_X.
- MFG_TL_SET_Y (Set Y)
-
Type: Real
Specifies the Y component of the total set length of the tool assembly.
- MFG_TL_SET_Z (Set Z)
-
Type: Real
Specifies the Z component of the total set length of the tool assembly.
- MFG_ORIENT_ANGLE (Orientation)
-
Type: Real
If a boring bar is used, defines the angle between the boring bar and the tool assembly reference.
Technology Attributes
These attributes provide technological information without any impact on the tool path computation.
- MFG_NB_OF_COMP (Number of components)
-
Type: Integer
Specifies the number of components of the tool assembly.
- MFG_ASS_GAGE_1 (Gage 1 : G1)
-
Type: Real
Specifies the assembly gage between the tool and adapter or the tool and holder depending on the number of components on the tool assembly.
- MFG_ASS_GAGE_2 (Gage 2 : G2)
-
Type: Real
Specifies the assembly gage between the adapter and holder, if there are three components on the tool assembly.
- MFG_TOOL_ASS_POWER (Power)
-
Type: String
Possible values:
- MFG_FIXED (Fixed)
- MFG_POWERED (Powered)
Defines whether the tool assembly is powered or fixed: Powered means that the tool turns and the part is fixed, Fixed means that the tool is fixed and the part turns.