Results Section

The Results section provides commands for running the simulation and viewing the results.

This page discusses:

Flyout for Results Storage
Flyout for Simulate
Flyout for Comparison Tools


	Results Storage See Flyout for Results Storage.
	Simulate See Flyout for Simulate.
	Resultant Sensor Computes resultant force and moment for the selected support. See Creating Resultant Sensors.
	Show Min/Max Values Highlights where the maximum and minimum values occur. See Controlling the Display of Maxima and Minima.
	Plot Sectioning Creates a cut through the model to view its interior. See Creating Cutting Surfaces.
	Display Group Configures the options to remove/keep portions of the model from the display.. See About Display Groups.
	Comparison Tools See Flyout for Comparison Tools.
	Report Creates a report document that summarizes the results of your simulation. See Creating Reports.
	Rendering Settings Configures display of geometry associated with the simulation, including products or parts that did not participate in the simulation. See Controlling Geometry Rendering.

Flyout for Results Storage


	Results Storage Specifies where simulation results are stored. See Setting the Results Storage Mode.
	Delete Simulation Results Clears the results and some of their contents associated with the simulation. See Deleting Simulation Results.

Flyout for Simulate


	Simulate Runs a simulation. See About Simulation Configuration.
	Simulate Options Sets network options for execution on 3DOrchestrate Stations. See Setting Remote Simulate Options for 3DOrchestrate.

Flyout for Comparison Tools


	Single View Displays plots in a single view. See Displaying Multiple Plot Views Simultaneously.
	Two Columns Displays plots in two views, split vertically. See Displaying Multiple Plot Views Simultaneously.
	Main View on Top Displays plots in three small views on the bottom and a larger view on the top. See Displaying Multiple Plot Views Simultaneously.
	Main View on Right Displays plots in three small views on the left side and a larger view on the right side. See Displaying Multiple Plot Views Simultaneously.
	Two Rows Displays plots in two views, split horizontally. See Displaying Multiple Plot Views Simultaneously.
	Four Views Displays plots in four equally sized views. See Displaying Multiple Plot Views Simultaneously.