Creating a Point

You can create a point.

Before you begin: Ensure that the Dimensional Constraints is selected from the Sketch section of the action bar.
See Also
Creating Points Using Coordinates
Creating Equidistant Points
Creating Points Using Intersection
Creating Points Using Projection
About Points
  1. From the Sketch section of the action bar, click Point .
  2. Locate the point.
    • Click anywhere in the work area.
    • Specify the point coordinates in the Tools Palette and press Enter.

    Tip: The constraints are assigned to this point as per the previously selected Dimensional Constraints in the Sketch section of the action bar.

    The point is created.