Using the Pie-Chart Report View of the Synchronization Report

You can use the Pie-Chart Report view of the synchronization report to have a global insight of the outcome of the synchronization process.

This task shows you how to:

Before you begin: Simulate a synchronization to display the Synchronization Report.
See Also
Synchronizing the 3D Flattened Geometry
Synchronizing the Configuration of Electrical Elements

Display Performed Actions

You can display information about the actions performed on your content during the synchronization.

  1. In the Synchronize panel, select Pie-Chart Report.

    Note: When running a synchronization for the first time, the pie chart view is displayed by default.

  2. Under Graphic view preferences, select Action.
    According to the actions performed on content, the pie chart is divided into colored sections. For more information about the coloring, see Synchronization Colors.
    Notes:
    • When running a synchronization for the first time, the Action view is displayed by default.
    • To be readable, the smallest pie chart section has by default a 10 deg angle. The other sections angles accommodate consequently.
  3. Hover over a section to display additional information.
    A tooltip appears. It displays:
    • The type of action
    • The number of occurrences on which this action is performed
    • The percentage of this performed action in the global results
      Note: The displayed percentage is a round number of the actual percentage.
  4. Click a section.
    In this view, the information is displayed in a table, and is filtered according to the section you selected.

Display Synchronization Status

You can display information about the synchronization status of the content after the process.

  1. In the Synchronize panel, select Pie-Chart Report.

    Note: When running a synchronization for the first time, the pie chart view is displayed by default.

  2. Under Graphic view preferences, select Sync status.
    According to the synchronization status, the pie chart is divided into colored sections. For more information about the coloring, see Synchronization Colors.
    Note: To be readable, the smallest pie chart section has by default a 10 deg angle. The other section angles accommodate consequently.
  3. Hover over a section to display additional information.
    A tooltip appears. It displays:
    • The synchronization status
    • The number of occurrences corresponding to this status
    • The percentage of this status in the global results
      Note: The displayed percentage is a round number of the actual percentage.
  4. Click a section.
    In this view, the information is displayed in a table, and is filtered according to the section you selected. For more information, see Using the Advance View of the Synchronization Report.