Surface Section

The Surface section of the action bar provides commands for creating surfaces.

This page discusses:

Flyout for Extrude
Flyout for Sweep
Flyout for Multi-Sections Surface


	Extrude See Flyout for Extrude
	Sweep See Flyout for Sweep
	Fill Creates a fill surface between boundary segments. See Creating Fill Surfaces.
	Multi-Sections Surface See Flyout for Multi-Sections Surface

Flyout for Extrude


	Extrude Creates an extruded surface by extruding a profile along a given direction. See Creating Extruded Surfaces.
	Revolve Creates a revolution surface by revolving a planar profile about an axis. See Creating Revolved Surfaces.
	Sphere Creates a spherical surface. See Creating Spherical Surfaces.
	Cylinder Creates a cylindrical surface by extruding a circle along a given direction. See Creating Cylindrical Surfaces.

Flyout for Sweep


	Sweep Creates a swept surface by sweeping out a profile in planes normal to a spine curve. See Creating Swept Surfaces.
	Adaptive Sweep Creates an adaptive swept surface that use an implicit profile and its constraints along a guiding curve. See Creating Adaptive Swept Surfaces. Note: This command is available in all Generative Shape Design apps except Generative Wireframe and Surface app.

Flyout for Multi-Sections Surface


	Multi-Sections Surface Creates a multi-section surface by sweeping one or more section curves along an automatically computed or user-defined spine. See Working with Multi-Sections Surfaces.
	Blend Creates a blended surface between two wireframe elements. See Creating Blended Surfaces.