Creating Gaps

You can create crimp surfaces with a constant gap distance on a support surface. The curve selected as guide defines the gap course.


Before you begin:
  • You must have access to the ICEM Shape Morphing app.
  • Open a 3D shape containing a surface and a curve.
See Also
About Create Gap
Create Gap Dialog Box
  1. From the Surface section of the action bar, click Create Gap.
  2. Select a curve as Guide and a surface as Support.


  3. In the Gap Type list, select Flange - Flange and click Apply.


  4. In the work area, increase the gap distance using the Distance handle.


  5. Modify length and angle of the flange on Side 2 using the Length and Angle handles.


  6. Optional: Select Trim Support and click OK.