Projecting 3D Elements onto the View Plane

You can create geometry in the current design view by projecting a 3D element onto the view plane.


Before you begin:
  • Open a 3D shape representation containing a layout. Open the layout in the 2D window, alongside the 3D window.
  • Make sure the front view is active. If not, double-click to activate it.
  • Create a left projection view from the existing front view.
See Also
About Use-Edges
About Projecting 3D Elements onto the View Plane
Creating Associative Use-Edges
  1. From the Sketch section of the action bar, click Project 3D Elements .
  2. Select the element to be projected. For the purpose of our scenario, select the bigger circle in the front view.



The edge is projected onto the left view plane.