Setting the Remesh Options

You can automate the remesh operation after each modification of the local specifications of a surface mesh.

Before you begin: Open the Surface Mesher.
See Also
Creating and Editing Surface Meshes
Constraining Geometries
Imposing Nodes
Assigning Meshing Techniques to 2D Mesh Domains
  1. From the Edit section of the action bar, click Remesh Options .
    The Global Mesh Options dialog box appears.
  2. To automatically remesh the surface after a modification (adding or removing geometry constraints, editing the topology...), select the Auto remesh on modification check box.

    Note: When you remove a constraint on an edge, the surface is not automatically remeshed. You have to force the remesh operation.

  3. To force the remesh operation after removing a constraint on an edge, select the Force remesh on modification check box.

    This option is available only when the Auto remesh on modification check box is selected.

  4. Click OK.