*BRITTLE SHEAR

Define the postcracking shear behavior of a material used with the brittle cracking model.

This option is used to define the postcracking shear behavior of a material used in a brittle cracking model. The BRITTLE SHEAR option must be used with the BRITTLE CRACKING option and must immediately follow it. The BRITTLE SHEAR option can be used in conjunction with the BRITTLE FAILURE option to specify a brittle failure criterion.

This page discusses:

See Also
*BRITTLE CRACKING
*BRITTLE FAILURE
In Other Guides
Cracking Model for Concrete

ProductsAbaqus/Explicit

TypeModel data

LevelModel

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the cracked shear behavior, in addition to temperature. If this parameter is omitted, it is assumed that the parameters defining cracked shear behavior are constant or depend only on temperature. See Material Data Definition for more information.

TYPE

Set TYPE=RETENTION FACTOR (default) to specify the postcracking shear behavior by entering the shear retention factor–crack opening strain relationship directly.

Set TYPE=POWER LAW to specify the postcracking shear behavior by entering the material parameters p and em⁢a⁢xc⁢k for the power law shear retention model.

Data lines if the TYPE=RETENTION FACTOR parameter is included (default)

First line

  1. Shear retention factor, ρ.

  2. Crack opening strain, en⁢nc⁢k.

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

The first point at each value of temperature must have a retention factor of 1.0 and a cracking strain of 0.0.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)

  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the postcracking shear behavior on temperature and other predefined field variables.

Data lines if the TYPE=POWER LAW parameter is included

First line

  1. em⁢a⁢xc⁢k.

  2. p.

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)

  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the postcracking shear behavior on temperature and other predefined field variables.