Managing Scallops

You can modify and delete the previously created scallops.

This task shows you how to:

Before you begin: Open a structure that contains scallops.
See Also
About Scallops
Creating Scallops
Managing Openings

Modify Scallops

You can modify the previously created scallops.

  1. From the Detail section of the action bar, click Scallop on Panel and Plate .
    The Scallop dialog box appears.
  2. Select the panel or plate that has scallops you want to modify.
    All the scallops are listed in the dialog box.
  3. Select the required rows and click Edit Scallop.
    The Scallop Definition dialog box appears.
  4. Modify the scallops:
    1. Select the contour type and contour name in the list.
    2. Optional: In case of the catalog type scallop, modify the contour parameters.
    3. Click Apply.
    4. Click OK.
    The scallops are modified. The modified contour type and contour name appear in the Scallop dialog box.

Tip: To edit a scallop, you can also select the scallop in the work area and click Scallop on the context toolbar.

Delete Scallops

You can delete the previously created scallops.

  1. From the Detail section of the action bar, click Scallop on Panel and Plate .
    The Scallop dialog box appears.
  2. Select the panel or plate that has scallops you want to modify.
    All the scallops are listed in the dialog box.
  3. Select the required rows and click Delete Scallop.
    The scallops are deleted in the work area.