Simulate Section

The Simulate section allows you to request output from your simulation, execute the simulation, and filter the output requests.

This page discusses:



Output
Requests type of output from the simulation.
See Defining Output Requests.
Operator Filter
See Flyout for Filters.


Results Storage
See Flyout for Simulation Options.


Model and Scenario Checks
Checks for errors in the current model and scenario.
See Performing Model and Scenario Checks.


Simulation Checks
Complete the Model and Scenario Checks, and check the simulation for any issues likely to prevent it from running successfully.
See Performing Simulation Checks.


Simulate
See Flyout for Simulate.


External Solve
Submits a simulation to be run using a third-party solver.
See Performing a Batch Execution Using an External Tool.

Flyout for Filters

Operator Filter
Filters output based on the maximum, minimum, or absolute maximum values for an output request.
See Defining Operator Filters.
Butterworth Filter
Filters output based on the cutoff frequency and filter order. The Butterworth Filter is a digital filter with maximally flat frequency response.
See Defining Butterworth Filters.
Chebyshev Type 1 Filter
Filters output based on the cutoff frequency and filter order. Compared to the Butterworth Filter, the Chebyshev Type 1 filter has a sharper transition between the passband and the stopband, with a ripple in the passband.
See Defining Chebyshev Type I Filters.
Chebyshev Type 2 Filter
Filters output based on the cutoff frequency and filter order. Compared to the Butterworth Filter, the Chebyshev Type 2 filter has a sharper transition between the passband and the stopband, with a ripple in the stopband.
See Defining Chebyshev Type II Filters.

Flyout for Simulation Options



Results Storage
Specifies where simulation results are stored.
See Setting the Results Storage Mode.


Delete Simulation Results
Clears the results and some of their contents associated with the simulation.
See Deleting Simulation Results.


Delete Restart Data
Deletes Restart Data associated with analysis cases.
See Deleting Restart Analysis Data.

Flyout for Simulate



Simulate
Runs a simulation for your current model and scenario.
See Running a Simulation from an App.


Simulate Options
Sets network options for execution on 3DOrchestrate Stations.
See Setting Remote Simulate Options for 3DOrchestrate.