Modifying and Deleting Plane Groups

You can modify and delete plane groups.

This task shows you how to:

Before you begin: Create a reference plane system.
See Also
Creating Reference Plane System
About Table Editor
Creating Plane Groups

Modify Plane Group

You can modify a plane group by changing the number of planes in each group and spacing between planes.

  1. From the Operations section of the action bar, click Table Editor .
    The Table Editor dialog box appears.
  2. In the Plane System list, select a plane system.
    All reference planes of the selected plane system are displayed.
  3. In the Plane Group tab, double-click the cell under the No of Planes column.
  4. Enter the required number of planes.
    The number of planes are added or deleted in the reference plane system in the work area.
  5. Double-click the cell under the Spacing column.
  6. Enter the required spacing value.
    The spacing between the reference planes is changed for the plane group and the modification is visible in the work area.
  7. Click OK.

Delete Plane Group

You can delete the required plane group.

  1. In the Plane Group tab, right-click a cell and select Delete .
    The selected plane group is deleted.

    The plane groups below the deleted plane group are updated and the reference plane system is updated in work area.

  2. Click OK.