Feature Section

The Feature section of the action bar provides 3D shaping and editing tools.

This page discusses:

Plane
See Flyout for Plane.
Loft
See Flyout for Loft.
Fillet
See Flyout for Fillet.
Draft
Creates a taper on the selected faces of a product by a specified angle.
See Draft.
Split
See Flyout for Split Face, Body, or Combine.
Move Face
See Flyout for Move Face or Body.
Delete Face
See Delete Faces.
Scale
Scales a solid or surface body about a selectable origin.
See Scale.
Insert Geometry
Inserts an existing geometry as a new feature of the current product.
See Inserting an Existing Geometry.
Through Point Curve
Creates curves using a series of points.
See Creating Through Point Curves.
Loft Surface
Creates a surface loft by moving profiles along guide curves
See Creating a Loft Surface.
Offset
Offsets faces or bodies.
See Offsetting a Face or Body.
Ruled Surface
Creates Ruled Surface from an edge of an existing model.
See Creating a Ruled Surface.
Fill Surface
Fills a gap in a component.
See Creating a Filled Surface.
Knit
Combines two or more adjacent surfaces.
See Flyout for Knit.
Extend Surface
Extends the selected surfaces.
See Extending a Surface.
Trim Surface
Trims geometry to create a new part.
See Trimming a Surface.

Flyout for Plane

Plane
Creates planes to reference during operations such as sketching, creating a section view, and designating a neutral plane for a draft feature.
See Reference Plane.
Axis
Creates axes to reference during operations such as revolving and circular patterns.
See Reference Axis.
Point
Creates points to reference during operations such as specifying distance and arcs.
See Reference Point.
Axis System
Creates a reference coordinate system relative to the position of a global coordinate system.
See Defining an Axis System.

Flyout for Loft

Loft
Creates solid, surface, and thin loft by moving profiles along guide curves.
See Loft and Loft Cut.
Loft Cut
Creates solid, surface, and think loft cut by moving profiles along guide curves.
See Loft and Loft Cut.

Flyout for Knit

Knit
Combines two or more adjacent surfaces.
See Knitting and Unknitting Faces or Bodies.
Unknit
Disconnects two or more adjacent surfaces.
See Knitting and Unknitting Faces or Bodies.

Flyout for Fillet

Fillet
Creates a rounded internal or external face on a product.
See Fillet.
Chamfer
Creates a beveled feature on selected edges, faces, or vertices.
See Chamfer.

Flyout for Split Face, Body, or Combine

Split
Splits a part into multiple parts.
See Splitting Bodies or Faces.
Combine
Combines geometry to create a part.
See Combine.

Flyout for Move Face or Body

Move Face
Moves or copies faces.
See Move Faces.
Move Body
Moves and rotates a body parametrically.
See Move Body.