Geometry Section

The primary area of the Geometry section provides commands for creating geometrical elements.

This page discusses:

Flyout for Creating Lines
Flyout for Performing Operations
Flyout for Pad
Flyout for Hole


	Sketcher Creates a sketch. See Sketcher User's Guide.
	Point Creates a point.
	Line See Flyout for Creating Lines
	Plane Creates a plane.
	Axis System Creates an axis system. See Defining an Axis System
	Extract See Flyout for Performing Operations.
	Pad See Flyout for Pad.
	Hole See Flyout for Hole.

Flyout for Creating Lines


	Line Creates a line.
	Spline Creates spline curves.

Flyout for Performing Operations


	Extract Extracts a face or a surface edge.
	Join Assemble adjacent curves or surfaces to one element.
	Projection Creates geometry by projecting one or more elements onto a support.

Flyout for Pad


	Pad Creates a pad to ease the creation of Inserts. See Part Design User's Guide.
	Draft Creates a constant or a variable draft based on a neutral element. See Part Design User's Guide.
	Edge Fillet... Creates a radius fillet with a constant radius or variable radii.
	Mirror Mirrors a body or a list of features using symmetry of a face or a plane. See Part Design User's Guide.

Flyout for Hole


	Hole Creates holes in a 3D part. See Part Design User's Guide.
	Pocket Creates a pocket in a 3D shape from a profile. See Part Design User's Guide.