Workflow

This topic describes a suggested workflow when working in Flow Driven Generative Design.

This task shows you how to:

Create a Flow Optimization

  1. Perform a flow optimization by creating or selecting a flow optimization case. See Creating a Flow Optimization.
  2. Specify the fluid set and volumes to optimize. See Defining the Model.
  3. Define the conditions to specify pressure or velocity. See Applying Conditions.
  4. Validate the setup. See Validating the Setup.
  5. Define the parameters to run the simulation. See Optimizing the Setup.
  6. Generate the design and validate it using a flow analysis. See Generating and Validating the Concept Design.