|
- Iso-Thickness
Areas
- Creates or edits iso-thickness areas
for a quicker and easier design.
- Use
following options to enhance the creation of top surfaces:
- Iso-Thickness Area: Creates the ITA group only inside a selected contour.
- No Thickness Area: Includes areas with no plies in the ITA group.
- Extended Limits (Auto, or with selection of Extended Limit and Start
EOP): Extends the top surface to be used as reference surface or for material
excess.
See Creating or Editing Iso-Thickness Areas.
|
|
- Iso-Thickness Junction
Wizard
- Uses a wizard to create, check,
validate junction lines, and find locations where they are missing or
incorrect.
See Using the Iso-Thickness Junction Wizard.
|
|
- Iso-Thickness Junction
Lines
- Creates iso-thickness junction lines
manually from iso-thickness areas.
See Creating Iso-Thickness Junction Lines Manually.
|
 |
- Solid From Iso-Thickness
Areas
- Creates a solid from iso-thickness
areas
- Use following options to enhance
the creation of top surfaces:
- Iso-Thickness Area: Creates the ITA group only inside a selected contour.
- No Thickness Area: Includes areas with no plies in the ITA group.
- Extended Limits (Auto, or with selection of Extended Limit and Start
EOP): Extends the top surface to be used as reference surface or for material
excess.
See Creating the Solid from Iso-thickness Areas.
|
 |
- Solid From
Plies
- Creates an exact solid, possibly with
colored faces, or a polygon with a network of curves.
See Creating a Solid From Plies.
|
 |
- Elevate Solid or Top
Surface
- Uses the definition of variable
cores (contour and height) to elevate a top surface or a solid created from
iso-thickness areas.
See Taking Variable Cores into Account in Solids or Top Surfaces.
|
|
-
Top Surface From Virtual
Stacking
-
Creates a top surface from virtual
stackings.
See
Creating a Top Surface from the Virtual Stackings.
|