Second Secondary Area

The second secondary area of the Behavior Tools section provides a command for updating the generated model from the physical model, a command for opening the physical model used to generate the current Modelica model, and a command for recomputing the cut joint configuration.

Update Current Model from Physical Model
Updates the current model from the physical model.
Click command to update.
See Updating, from the Physical or Logical Model, a Generated Modelica Model of a Kinematic Mechanism or an Engineering Model.
Open Physical Model
Opens the Physical model used to generate the current Modelica model.
See Retrieving the Kinematic Mechanism, the 3D Piping Model, or the 3D HVAC Model.
Recompute CutJoint Parameters
Recomputes the CutJoint configuration.
See Recomputing the Cut Joint Configuration.