Rough Turning

The Rough Turning dialog box appears when you select Rough Turning. This dialog box contains controls for:

This page discusses:

Rough Turning.1

Name

This shows the name of the Rough Turning.1

Comment

This area you can place a comment if required.

By default, No Description

Position

This area you can place a comment if required.

By default, No Description

Spindle

This area you can place a comment if required.

By default, No Description

Misc Icons

Depending on the scenario, these are active:

- visualize the specified geometry.

- removes the specified geometry.

- visualize associated FTA requirements. You can add, remove, hide or show FTA requirements in the panel that appears.

See Geometry Parameters

- visualize associated FTA requirements. You can add, remove, hide or show FTA requirements in the panel that appears.

See Using NC Machine Programming Verification

Strategy Parameters

Strategy Parameters

See: Strategy Parameters

Geometry Parameters

Geometry Parameters

See Geometry Parameters

Tool Parameters

Tool Parameters

See Tool Parameters

Feedrate and Spindle Speed Parameters

Feedrate and spindle speed parameters

See Feedrate and Spindle Speed Parameters

Macro Parameters

Macro parameters

See Macro Parameters

See Defining Macros on Turning Operations