Thread Turning

The Thread Turning dialog box appears when you select Thread Turning. This dialog box contains controls for:

This page discusses:

Thread Turning.1

Name:

This shows the name of the Thread Turning.1

Comment:

This area you can place a comment if required.

By default, No Description

Position:

This area you can place a comment if required.

By default, No Description

Spindle:

This area you can place a comment if required.

By default, No Description

Misc Icons

Depending on the scenario, these are active:

- visualize the specified geometry.

- removes the specified geometry.

- visualize associated FTA requirements. You can add, remove, hide or show FTA requirements in the panel that appears.

See Strategy Parameters

See Working with Intermediate Stock

See Using NC Machine Programming Verification

Strategy Parameters

Strategy Parameters

See: Strategy Parameters

Geometry Parameters

Geometry Parameters

See Geometry Parameters

Tool Parameters

Tool Parameters

See Tool Parameters

Feedrate and Spindle Speed Parameters

Feedrate and spindle speed parameters

See Feedrate and Spindle Speed Parameters

Macro Parameters

Macro parameters

See Macro Parameters

See Defining Macros on Turning Operations