Context Toolbars

Commands Accessible from Mount and Import Resources

Depending on the type of machine in session, the following commands are available when selecting Mount and Import Resources from the Setup section of the action bar:

	Replace Machine or Configured Machining Cell Replaces a current machine or machining cell with another one. See Replace a Machine.
	Add New Machine or Configured Machining Cell Adds a machine or machining cell in a multi-machine context. See Add a Machine.
	Assign a New Machine from a Catalog Browser Assigns a machine or machining cell from a Catalog Browser. See Assigning an NC Machine from a Library Browser.
	Import Accessory Inserts existing accessories in the NC machine. See Import and Mount Accessories and Adaptors in One Shot.
	Import Tool Assembly Inserts existing tool assemblies. See Import and Mount a Tool Assembly.
	Import Manufacturing Product Inserts an existing manufacturing product. See Mounting a Workpiece on a Machine.
	Show/Hide Display of Linear Travel Limits Box Shows or hides the display of the bounding box of the linear degrees of freedom for the tool mount point.

Reachability Test Checks that a milling machine can reach the workpiece at the current tool position. See Checking the Reachability of a Milling Machine.

Mount Accessories

	Unmount Resource Removes an accessory from the machine. See Unmount an Accessory Within a Program.
	Deactivate Accessory Configuration Disables and hides an accessory on the machine. See Mount an Accessory Within a Program.

Face Selection

See Selecting Faces of a Part in a Turning Operation.

	Flip Displays the revolution profile above or below the spindle or axial axis of the machining plane.
	Display Option Panel Opens the Options panel that lists the types of links you can create between two selected faces.
	Resets all Geometry Selections Cancels the selection of faces.
	Accepts Geometry Selections Validates the selection of faces.
	Cancels Geometry Selections Cancels the selection of faces and closes the context toolbar.