Creating a Profile Contouring Operation: By Flank Contouring

You can create a Profile Contouring operation in Flank Contouring mode.

See Also
Profile Contouring
Defining a Virtual Bottom Plane
  1. Activate the Manufacturing Program and click Profile Contouring in the Prismatic Machining action bar.

    A Profile Contouring entity is added to the Manufacturing Program.

    The Profile Contouring dialog box appears directly at the Geometry tab . This tab includes a sensitive icon to help you specify the geometry.

    The guiding element in the icon is colored red indicating that this geometry is required for defining the operation. All other geometry is optional.

  2. Still in the Geometry tab: .

    See Selecting Geometry

    1. Set the Contouring mode to By Flank Contouring.
    2. Click the guiding element in the icon, then select the vertical face of the part in the 3DEXPERIENCE platform.
    3. Click the first relimiting element in the icon, then select a vertical edge at one end of the part in the 3DEXPERIENCE platform.
    4. Click the second relimiting element in the icon, then select the vertical edge at the other end of the part in the 3DEXPERIENCE platform.
    5. Set offsets on the geometric elements, if needed.
    The guide and limit elements of the icon are now colored green indicating that this geometry is defined. These are also indicated on the part.
    Note: A Collision Checking capability is available in the Geometry tab, which allows collision checking between the tool and guide elements during macro motions.


  3. Select the Strategy tab .
    1. Select a Tool path style.
    2. Set the machining criteria such as machining tolerance, stepover conditions, finishing, HSM, and User Parameters.
  4. Go to the Tool tab to select a tool.

    See Assigning a Tool Element to a Machining Operation

  5. Select the Feeds and Speeds tab to specify the feedrates and spindle speeds for the operation.
  6. Select the Macro tab , you can add approach and retract motions to the operation.

    See Defining Macros on Milling Operations

  7. Click Display or Simulate to check the validity of the operation.

    See Simulating the Tool Path.

    • The tool path is computed.
    • A progress indicator is displayed.
    • You can cancel the tool path computation at any moment before 100% completion.


  8. Click OK to create the operation.