Secondary Area


	Harness Flattening Parameters Sets the general harness flattening parameters before flattening a segment. See General Parameters.
	Extract Duplicates 3D electrical content for harness flattening. This command is only available in the flattened content tab. See Extracting the Geometry.
	Generate Layout Flattens 3D harness parallel to the active plane. This command is only available in the flattened content tab. See Flattening Entirely.
	Flatten Status Lets you check the flatten status of branches and select some parts of the electrical geometry you do not want to be flattened. See Flyout for Managing Flatten Status.
	Export Electrical System Exports electrical physical systems in KBL format. See Exporting an Electrical Physical System in KBL.

Flyout for Managing Flatten Status


	Flatten Status Lets you check the flatten status of branches and select some parts of the electrical geometry you do not want to be flattened. This command is only available in the flattened content tab. See Preparing the Flattening Process.
	Link Geometries Links two electrical geometries geometrically and electrically after their extraction and flattening. This command is only available in the flattened content tab. See Linking Electrical Geometries.