Engineering Specification Capture & Reuse Access to Content

Content Categories

Depending on your assigned responsibilities, you can create and manage the following types of content with Engineering Specification Capture & Reuse.


Content Type	Category
Customer Table End Style Table Fluid Category Table Fluid table Insulation Specification Insulation Type Table Logical Part Subtype Table Mapping Part Subtype Table Material Category Table Material Table Part Subtype Table Standard Table HVAC Automated Offset Table HVAC Automatic Part Rule Table HVAC Available Bend Angle Table HVAC Bend Diameter Table HVAC Branch Rule Table HVAC Compatibility Rule Table HVAC Customer Advanced Table HVAC Directional Length Table HVAC Duct Reference Dimension Table HVAC Equivalent Diameter Table HVAC Flexible Duct Fabrication End Style Table HVAC Flexible Duct Filter HVAC Height Table HVAC Insulation Dimension Table HVAC Insulation Filter HVAC Minimum Straight Length Table HVAC Nominal Bend Radius Table HVAC Part Filter HVAC Reducer Rule Table HVAC Rigid Duct Fabrication End Style Table HVAC Rigid Duct Filter HVAC Specification HVAC Spool Rule Table HVAC Turn Rule Table HVAC Width Table Piping Automated Offset Table Piping Automatic Part Rule Table Piping Available Bend Angle Table Piping Bend Diameter Table Piping Bending Rule Table Piping Branching Rule Table Piping Compatibility Rule Table Piping Customer Advanced Table Piping Directional Length Table Piping Flexible Pipe fabrication End Style Table Piping Flexible Pipe Filter Piping Insulation Dimension Table Piping Insulation Filter Piping Minimum Straight Length Table Piping Nominal Bend Radius Table Piping Nominal Size Table Piping Outside Diameter Table Piping Part Filter Piping Rating Table Piping Reference Dimension Table Piping Rigid Pipe Fabrication End Style Table Piping Rigid Pipe Filter Piping Specification Piping Spool Rule Table Piping Turn Rule Table Piping Reducer Rule Table Raceway Automated Offset Table Raceway Available Bend Angle Table Raceway Branching Rule Table Raceway Compatibility Rule Table Raceway Customer Advanced Table Raceway Directional Length Table Raceway Gap Table Raceway Height Table Raceway Minimum Straight Length Table Raceway Nominal Size Table Raceway Part Filter Raceway Realization Type Table Raceway Reducer Rule Table Raceway Specification Raceway Spool Rule Table Raceway Tray Filter Raceway Tray Reference Dimension Table Raceway Turn Rule Table Raceway Width Table	Definition

The content you can access and the tasks you can perform depend on your responsibilities. For more information, see 3DEXPERIENCE Platform: Content Categories.

Responsibilities

Engineering Specification Capture & Reuse uses the 3DEXPERIENCE platform 3DSpace baseline responsibilities that your business administrator assigns to you.

The following table describes the permissions for design task responsibilities.


Responsibility	Permissions
Reader	Has read access to any content Can create and modify Personal Management category content
Author	Can use all the authoring commands.

Your business administrator can configure rules that change the default access behavior.

On premises only: Your business administrator can change the default responsibilities that control your access to commands, content, and collaborative spaces. Companies can also implement additional customized responsibilities.

This guide describes the default behavior when describing access to content or commands.

Your access to content or commands is determined by more than your responsibility. The current collaborative space, your organization, the current lifecycle state of the content, the app you are using, and other customizations all affect whether you can access content or commands. You might have access to some content or commands only under certain conditions.

For more information, see 3DEXPERIENCE Platform: Responsibilities.

Content Lifecycle

For more information, see 3DEXPERIENCE Platform: Content Lifecycle.