Model Section

The Model section of the action bar provides commands for creating geometry and technological features.

This page discusses:

Flyout for Point
Flyout for Pad
Flyout for Shaft
Flyout for Rib
Flyout for Multi-Sections Solid


	Positioned Sketch Creates a positioned sketch See Part Design User's Guide: Creating a Positioned Sketch.
	Natural Shape Creates a Natural Shape feature. See Natural Shape User's Guide: Creating Shapes: Creating Simple Shapes.
	Point Creates a point See Flyout for Point.
	Flyout for Pad Flyout for Pad
	Shaft Creates a shaft by rotating a profile about an axis.
	Thread/Tap Creates a thread or a tap of specified standards.
	Hole Creates holes in a 3D part. See Creating Holes.
	Rib Creates a rib by sweeping a profile along a center-curve.
	Solid Combine Creates an intersection solid by extruding two closed profiles.
	Multi-sections Solid Creates a solid using section curves and the guide curve. Select multiple section curves. The spine can be user-defined or automatically computed. See Flyout for Multi-Sections Solid.
	Close Surface Closes a surface.
	Thick Surface Adds material to a surface in two opposite directions.
	Shell Empties a feature by removing material, while keeping a thickness on its sides.
	Stiffener Creates a brace or a rib, to a wall or a stand-off to strengthen it.
	Solid Tool Sweep Moves a symmetrical 2D profile along a specified path in the 3D area. See Creating the Solid Tool Sweep.

Flyout for Point


	Point Creates a point See Part Design User's Guide: Reference Elements: Creating Points.
	Line Creates a line See Part Design User's Guide: Reference Elements: Creating Lines.
	Plane Creates a plane See Part Design User's Guide: Reference Elements: Creating Planes.
	Axis System Creates an axis system See Part Design User's Guide: Using Miscellaneous Tools: Defining an Axis System.
	Work on Support 3D Creates a geometry by using a 3D support See Generative Shape Design User's Guide: Using Tools: Working with a 3D Support.

Flyout for Pad


	Pad Creates a pad from an open or a closed profile.
	Pocket Creates a pocket in a 3D shape from a profile. See Creating Pockets.
	Drafted Filleted Pad Creates a pad with draft and fillets, from a profile.
	Drafted Filleted Pocket Creates a pocket with draft and fillets from a profile.
	Multi-Pad Creates a multi-pad from a multi-domain profile.
	Multi-Pocket Creates a multi-pocket from a multi-pocket profile.

Flyout for Shaft


	Shaft Creates a shaft by rotating a profile about an axis.
	Groove Creates a groove by rotating a profile about an axis.

Flyout for Rib


	Rib Creates a rib by sweeping a profile along a center-curve.
	Slot Creates a slot by sweeping a profile along a center-curve.

Flyout for Multi-Sections Solid


	Multi-sections Solid Creates a solid using section curves and the guide curve. Select multiple section curves. The spine can be user-defined or automatically computed. See Creating Multi-sections Solids.
	Removed Multi-sections Solid Creates a cavity using section curves and the guide curve. Select multiple section curves. The spine can be user-defined or automatically computed. See Creating Removed Multi-sections Solids.