Primary Area


	Part Mode See Flyout for Part Mode
	Set Context From Object Sets the context of work with the properties of the selected object. Select a logical or physical route or part. The Context section of the Data Information panel is updated with the new properties of the selected object. See Defining a Context from an Object.
	Create Route Creates a route from current context. See Editing Routes
	Place Part Lets you select a reference and a location to place a part. The location can be a port, a route, a cross, on the route skin or in space. The reference can be selected by defining a subtype, from a catalog, or from the chooser. If you are working in Generative Fluid 3D Design, the reference can selected from a logical object. See Placing HVAC Parts.
	Duplicate/Mirror Instance Duplicates a multi selection of an instance from different products. See Duplicating Instances
	HVAC Spool Creates an empty HVAC spool. See Creating a Spool
	List Impacting Spools Lists the spools that impact the selected one. Select a spool in the tree or in the work area. Right-click a spool in the Spools Impacted dialog box to disconnect or isolate a spool. See Listing Impacted Spools.
	Network Assistant Provides tools to analyze and repair the network. See Using the Network Assistant
	Reveal Build Warnings Lets you reveal warnings and errors that occur during the creation and modification of your flexible routes. See Revealing Warnings on Flexible Routes.
	Spreadsheet Provides options to manage objects using the Spreadsheet. See Using the Spreadsheet

Flyout for Part Mode


	Part Mode Sets the context to part mode and allows you to access commands for designing the network. To display the commands, click one of the selection options, apart from the Default Selection. See Selection Options and Process Modes.
	Manipulate Mode Sets the context to manipulate mode and allows you to access commands for modifying the shape of the network. To display the commands, click one of the selection options, apart from the Default Selection. See Selection Options and Process Modes.
	Spool Mode Sets the context to spool mode and allows you to work with spools. To display the commands, click one of the selection options, apart from the Default Selection. See Selection Options and Process Modes.
	Insulation Mode Sets the context to insulation mode and allows you to work with insulations. To display the commands, click one of the selection options, apart from the Default Selection. See Selection Options and Process Modes.
	PCF Mode Sets the context to PCF mode and allows you to work with PCF commands. To display the commands, click one of the selection options, apart from the Default Selection. See Selection Options and Process Modes.