Wireframe Section

The Wireframe section of the action bar provides commands for creating wireframe elements.

Axis System
Defines axis systems by selecting a point, vertex, or an axis system.
See Defining an Axis System.
Point
Creates reference points.
See Creating Points.
Points and Planes Repetition
Creates several points and planes on a curve.
See Creating Multiple Points and Planes.
Line
Creates lines.
See Creating Lines.
Polyline
Creates lines composed of connected segments.
See Creating Polylines.
Axis
Creates reference axes.
See Creating Axis.
Plane
Creates reference planes.
See Creating Planes.
Planes Between
Creates planes between two other planes.
See Creating Planes between Other Planes.
Circle
Creates circles.
See Creating Circles.
Corner
Creates 3D corners or corners on a support.
See Creating Corners.
Through Point Curve
Creates curves using a series of points.
See Creating Through Point Curves.
Spiral
Creates curves in the shape of spirals.
See Creating Spirals.
Helical Curve
Creates spiral curves that you can use as a path for swept and lofted features.
See Creating Helical Curves.
Projection Curve
Creates curves from one of more elements projecting to a plane.
See Creating Projection Curves.
Intersection Curve
Creates curves using the intersect of surfaces.
See Creating Intersection Curves.
Combine
Creates curves resulting from the intersection of the extrusion of two curves.
See Creating Combined Curves.
Parallel Curve
Creates curves that are parallel to a reference curve.
See Creating Parallel Curves.