EE Tools Section

The EE Tools section provides commands for representation and computation tools.

This page discusses:

See Also
About Communication Protocol Standards
Import Files
See Flyout for Import Files.
Launch Bus Load Analysis
Starts a dynamic analysis of CAN buses load.
You must first select a system mapping or a project.
See Estimating Bus Load for a Project.
Launch Bus Static Load Analysis
Starts a static analysis of CAN buses load.
You must first select a system mapping or a project.
See Estimating Bus Static Load for a Project.
Build Frames
Completes communication matrices by generating frames.
You must select a system mapping or a project.
See Generating Frames.
Electrical Syntheses
See Flyout for Electrical Syntheses.
Project Snapshot
Generates a snapshot of the selected project.
The snapshot viewer contains system mappings, configurations, and EE information.
See Displaying a Project Snapshot.

Flyout for Import Files

Import EEXML Files
Imports data from a .zip archive of .eexml files.
See Importing EEXML.


Export EEXML Files
Exports to .eexml format, the selected EE component and all the objects required for this component.
Downloads a set of EEXML files contained in a .zip archive.
Import DBC Files
Imports data from a .dbc file to populate the selected matrix.
Select a communication matrix in the Matrices node and select Import DBC Files. The frames, PDUs, and bus signals are imported into the selected communication matrix.
See Importing DBC Files.
Export DBC Files
Exports the selected CAN or LIN matrices.
Generates a .dbc file and downloads it.
See Exporting DBC Files.
Import LDF Files
Imports data from an .ldf file to populate the selected matrix.
Select a communication matrix in the Matrices node and select Import LDF Files. The frames, PDUs, and bus signals are imported into the selected communication matrix.
See Importing LDF Files.
Export LDF Files
Exports LIN matrices.
Generates an .ldf file and downloads it.
See Exporting LDF Files.
Export AutomationML Files
Exports the selected topology or rack and all the objects required for this component to AutomationML.
Generates a .zip file and downloads it.
See Exporting AutomationML Files.
Export AUTOSAR Files
Exports the selected hardware architecture, software architecture, or system mapping and all the objects required for this component to AUTOSAR 4.0.
Generates an .arxml and a .log files and downloads them.
See Exporting ARXML Files.

Flyout for Electrical Syntheses

Current Consumption Synthesis
Performs an analysis of currents consumed by devices.
You must first select a topology defined for power distribution.
See Estimating Current Consumption.
Electrical Devices Cost Synthesis
Performs an analysis of the total cost of electrical devices.
You must first select a topology defined for power distribution.
See Estimating Electrical Devices Cost.
Equipment I/O Report
Performs an analysis of the equipment of the selected topology.