|
-
Formboard
- Generates the formboard of your 3D design content in one single process.
- This command is only available in the 3D design content tab.
- See About the Formboard Generation Process.
|
 |
- Prepare Layout
- Manages the flattening layout with a single command, in real time with
different options that you can activate through context toolbars.
- This command is only available in the flattened content tab.
- See Preparing the Layout.
|
 |
-
Synchronize
- Synchronizes the flattened view to reflect changes made in the 3D
harness.
- This command is only available in the flattened content tab.
- See Synchronizing the 3D Flattened Geometry
|
 |
-
Analyze Torsion
- Analyzes the relative torsion between a flattened assembly and a 3D harness
assembly.
- This command is only available in the flattened content tab.
- See Analyzing and Editing Torsion.
|
|
-
Length Tolerance
- Applies length tolerance on a segment or a part of it.
- See Flyout for Managing Length Tolerance.
|
 |
-
Table Management
- Instantiates the tables to place the drawing of flatten data on it.
- See Instantiating Tables.
|
 |
-
Junction Validation
- Validates junction arrangement of the flatten data against the harness data.
- See Validating Junctions.
|
